Caterpillar TH82 Non-US
Series: Caterpillar Telescopic Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Caterpillar telehandlers TH and TL – from TH62/TH63 to TH580B and TL1255: the type logic of the European and US models, 60 to 101 kW
Caterpillar entered the telehandler market in the 1990s with the TH62, TH63, TH82 and TH83, which appear in the register in US and non-US versions – the number roughly gave capacity and lift height in tonnes and metres. From 2001 the TH210 to TH580B range followed, whose digits order the class: the first positions stand for capacity (TH330B about 3.3 t, TH460B about 4.6 t, TH580B about 5.8 t), the B for the generation; TH103 and TH406/TH407 are intermediate models for agriculture and construction. For North America there is the TL range – TL642, TL943, TL1055, TL1255 – by American convention: capacity in thousands of pounds and lift height in feet, so the TL1255 lifts 12,000 lb to 55 ft. For years the machines were built in cooperation with JLG; since 2016 Caterpillar has manufactured them itself again.
Read on 3 more paragraphs
The register lists 28 versions with 60.4 to 100.6 kW from Cat four-cylinders of 4,000 to 4,408 cm³ – 3054, 3054T and 3054E on the older, C4.4 ACERT on the younger models – at 2,200 rpm rated speed, service weights from 4,899 to 16,168 kg and heights from 1,900 to 2,720 mm.
Telehandlers are tool carriers: forks, bucket, crane hook, work platform and bale grab swap on the quick coupler, and the load moment limiter cuts the boom before the machine tips. The Cat models are found above all on construction sites, in brick and builders' merchants and in agriculture.
On used machines, operating hours, wear of the boom wear pads and chains, play in boom and frame bearings, the condition of hydraulic cylinders and tyres count; on models with aftertreatment, the service state of the particulate filter.
Sources: Kennwerte der Modelle Caterpillar Teleskoplader, Caterpillar Teleskoplader (Hersteller)
Technical data
Engine
| Engine model | 3,054correct |
|---|---|
| Power | 110.5 hp (60.4 kW)correct |
| Displacement | 4,000.1 cm³correct |
Dimensions and weights
| Height | 2,450 mmcorrect |
|---|---|
| Wheelbase | 2,971.8correct |
| Unladen weight | 7,470 kgcorrect |
Drivetrain and chassis
| Forward gears | 4correct |
|---|---|
| Reverse gears | 3correct |
| Tyre size | Cosntruct: 15.5x25 12 PR Agricult: 17.5LR24correct |
Working data
| Lift height | 7,600 mmcorrect |
|---|---|
| Hydraulic oil capacity | 150.3 lcorrect |
| Fuel tank capacity | 120.4 lcorrect |
More machines with this engine (Caterpillar 3054, 8)
Where this model stands
Power-to-weight ratio: 8.1 kW/t (60 kW / 7.5 t)
Stronger than 22% of the telehandlers in the register — out of 661 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Caterpillar TH82 Non-US have?
The Caterpillar TH82 Non-US delivers 110 hp.
How much does the Caterpillar TH82 Non-US weigh?
The unladen weight is 7,470 kg.
What engine does the Caterpillar TH82 Non-US have?
4,000 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Telehandler in 3D section
Turn the model, look inside and click an assembly — each one is explained.