Start › Mining equipment › Caterpillar › D6T LGP S

Caterpillar D6T LGP S Crawler

Series: D6T

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the D6T LGP S, Caterpillar offers a model from the Caterpillar Crawler Tractor series. The engine delivers 231.2 hp (149.1 kW), with a displacement of 8,799.9 cm³. The unladen weight is 21,783.3 kg. Ground clearance is 432.8 mm. The tank holds 424 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 188.9 l/min. Working pressure is 193 bar. The cooling system holds 70 litres. The oil fill is 28 litres. The electrical system runs on 24 V. The engine fitted is the C9 ACERT. The Caterpillar Crawler Tractor series covers 152 models. Rated output within it ranges from 48.7 to 948 hp; the D6T LGP S sits in the lower part of that range with 231.2 hp. Its immediate neighbours are the D7H WDA Series II below it with 218 hp and the D7R WHA above it with 233.2 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Mining equipment. 16 verified figures from 1 source are on file.

Technical data

Engine

Engine modelC9 ACERTcorrect
Power231.2 hp (149.1 kW)correct
Displacement8,799.9 cm³correct
Coolant capacity70 lcorrect
Engine oil capacity28 lcorrect

Dimensions and weights

Ground clearance432.8correct
Unladen weight21,783.3 kgcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears3correct
Reverse gears3correct
System voltage24 Vcorrect

Working data

Pump flow188.9 l/mincorrect
Hydraulic pressure193correct
Fuel tank capacity424 lcorrect

Other data

Height3,252.2correct

Where this model stands

Power-to-weight ratio: 6.8 kW/t (149 kW / 21.8 t)

Stronger than 55% of the mining equipment in the register — out of 945 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D6T LGP S have?

The Caterpillar D6T LGP S delivers 231 hp.

How much does the Caterpillar D6T LGP S weigh?

The unladen weight is 21,783 kg.

What engine does the Caterpillar D6T LGP S have?

8,800 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 16 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

D6T LGP VPAT

Crawler

D6T STD

Crawler

D6T WH LGP

Crawler

D6T WH XL

Crawler

D6T XL

Crawler

D6T XL VPAT

Crawler

D6T XW

Crawler

D6T XW VPAT

Crawler

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare