Technical register for agricultural, construction and commercial machinery · sourced data
StartMining equipmentCaterpillar › D3C XL Series III

Caterpillar D3C XL Series III Crawler

Series: D3C

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Caterpillar Crawler Tractor series from Caterpillar includes the D3C XL Series III. The engine delivers 79.1 hp (52.9 kW), has 6 cylinders, with a displacement of 4,998.1 cm³. Rated speed is 2,400 rpm. The unladen weight is 7,231 kg. Ground clearance is 301.8 mm. The tank holds 121.9 litres. The gearbox has 3 forward gears. There are also 3 reverse gears. The pump delivers 54.1 l/min. Working pressure is 172.4 bar. The cooling system holds 9.1 litres. The oil fill is 13.2 litres. The electrical system runs on 12 V. The engine fitted is the Cat 3046. The Caterpillar Crawler Tractor series covers 152 models. Rated output within it ranges from 48.7 to 948 hp; the D3C XL Series III sits at the bottom of that range with 79.1 hp. Its immediate neighbours are the D3G XL below it with 78.1 hp and the D4C LGP Series II above it with 81.1 hp. 1091 Caterpillar models across 47 series are on record. The model is listed under Mining equipment. 18 verified figures from 1 source are on file.

Caterpillar D3C — the smallest dozer in the C-series line

At 52 kW, 7.0 to 8.6 tonnes operating weight and 5.0 to 5.2 litres of displacement, the D3C is the smallest class in Caterpillar's C-series dozer programme. Six live models are on record in the database, differing mainly by suffix: D3C Series II and Series III, plus the LGP (Low Ground Pressure) and XL wide/narrow track variants.

Read on 4 more paragraphs

These suffixes mark technical revision steps within the same base machine. None of the sources checked offer reliable figures on the exact market introduction or on predecessor/successor models outside the C-series, so year figures are deliberately left out here.

The D3C serves as a compact dozer for smaller earthworks sites, in grounds maintenance, and anywhere the heavier D5-through-D9 classes would be too large and too costly to run.

For a used machine in this class, the condition of the track chain links, rollers and final drives matters most. The LGP variant is worth an extra look at its wider but more delicate track shoes.

In short: the D3C is Cat's entry class among C-series dozers, built as Series II and Series III and in standard, LGP and XL form.

Sources: Kennwerte der Modelle Caterpillar D3C, — Caterpillar D3C Series III Crawler Tractor (RitchieSpecs)

Technical data

Engine

Engine modelCat 3046correct
Power79.1 hp (52.9 kW)correct
Rated speed2,400 rpmcorrect
Cylinders6correct
Displacement4,998.1 cm³correct
Coolant capacity9.1 lcorrect
Engine oil capacity13.2 lcorrect

Dimensions and weights

Height2,730 mmcorrect
Ground clearance301.8correct
Unladen weight7,231 kgcorrect

Drivetrain and chassis

Gearbox typePower Shiftcorrect
Forward gears3correct
Reverse gears3correct

Working data

Pump flow54.1 l/mincorrect
Hydraulic pressure172.4correct
Fuel tank capacity121.9 lcorrect

Other data

Cab height2,667correct
System voltage12 Vcorrect

More machines with this engine (Cat 3046, 13)

Where this model stands

Power-to-weight ratio: 7.3 kW/t (53 kW / 7.2 t)

Stronger than 14% of the mining equipment in the register — out of 944 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Caterpillar D3C XL Series III have?

The Caterpillar D3C XL Series III delivers 79.1 hp.

How much does the Caterpillar D3C XL Series III weigh?

The unladen weight is 7,231 kg.

What engine does the Caterpillar D3C XL Series III have?

6 cylinders, 4,998 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 19 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Dump truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare