Start › Skid steer loaders › Case › SR150

Case SR150

Series: Case Skid Steer Loader

Source: https://www.landwirt.com/baumaschinen/radlader/case

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case SR150 belongs to the Case Skid Steer Loader series. The engine delivers 52.7 hp (36.5 kW), has 4 cylinders, with a displacement of 1,999.2 cm³. Torque is 147.8 Nm. Rated speed is 2,900 rpm. The wheelbase measures 941.8 mm. Ground clearance is 177.8 mm. The tank holds 60.6 litres. Maximum torque is reached at 1,750 rpm. The pump delivers 59.1 l/min. The hydraulic tank holds 15.1 litres. Working pressure is 206.8 bar. The electrical system runs on 12 V. The engine fitted is the ISM N844T/M3. Tyre size: 10 x 16,5. The Case Skid Steer Loader series covers 33 models. Rated output within it ranges from 46.6 to 91.2 hp; the SR150 sits at the bottom of that range with 52.7 hp. Its immediate neighbours are the 410 below it with 51.7 hp and the 1840 above it with 54.7 hp. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 18 verified figures from 1 source are on file.

Technical data

Engine

Engine modelISM N844T/M3correct
Power52.7 hp (36.5 kW)correct
Rated speed2,900 rpmcorrect
Torque147.8correct
Speed at max. torque1,750 rpmcorrect
Cylinders4correct
Displacement1,999.2 cm³correct
Aspirationturbochargedcorrect

Dimensions and weights

Wheelbase941.8correct
Ground clearance177.8correct

Drivetrain and chassis

Tyre size10 x 16.5correct
System voltage12 Vcorrect

Working data

Pump flow59.1 l/mincorrect
Hydraulic oil capacity15.1 lcorrect
Hydraulic pressure206.8correct
Fuel tank capacity60.6 lcorrect

Other data

Height1,920.2correct

Frequently asked questions

How much power does the Case SR150 have?

The Case SR150 delivers 52.7 hp.

What engine does the Case SR150 have?

4 cylinders, 1,999 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 18 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

1840

40XT

410

410 Series III

420

420 Series III

430

430 Series III

435

435 Series III

440

440 Series III

Sources: [1]

Skid-steer loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare