Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › Other models › MX120

Case IH MX120

Built: 1998 · Series: Other models

More machines from model year 1998

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The MX120 comes from Case IH. Production: 1998. The engine delivers 120 hp (91 kW), has 6 cylinders, with a displacement of 5,880 cm³. Torque is 493 Nm. Rated speed is 2,200 rpm. The machine is 4,600 mm long, 2,470 mm wide and 2,970 mm high. The unladen weight is 5,820 kg. The wheelbase measures 2,700 mm. The tank holds 263 litres. Transmission: 16 V/12 R and 32 V/24 R. The gross vehicle weight is 9,500 kg. The linkage is category II. The PTO runs at 540/1000 rpm. Rated output across the Case IH range ranges from 23 to 600 hp; the MX120 sits in the lower part of that range with 120 hp. Its immediate neighbours are the MXU 115 below it with 115 hp and the MXM 120 above it with 124 hp. Rated output across the Case IH range ranges from 17 to 450 kW; here the MX120 sits in the lower part of that range with 91 kW. 1222 Case IH models across 76 series are on record.

Case IH – other models: the collective page of tractors outside the named ranges, from the IH heritage (1056 XL, 1455 XL) through the 4200, 5100 and CS series to Farmall, Maxxum, Puma, Magnum and Steiger Quadtrac

This page gathers the Case IH tractors the register could not assign to a named range – the brand that emerged in 1985 when Tenneco bought the farm-equipment division of International Harvester and merged it with J.I. Case of Racine. The tractors therefore carry several origins: the IH 56 and 55 series from Neuss and Doncaster (1056 XL, 1455 XL, 1255) with the XL cab, the 4200 and 5100 (Maxxum) series from Neuss and Racine of the 1990s, the Steyr relatives CS and CVX after the merger into CNH in 1999, and today's Farmall (compact and utility tractors), Maxxum, Puma, Magnum and Steiger ranges, whose number gives the hp class – Puma 195 about 195 hp, Magnum 235 235 hp, Steiger 535 535 hp – and whose suffixes CVX, Quadtrac, Accusteer and Heavy-Duty mark the stepless transmission, the four-track undercarriage and chassis versions. The engines are IH's own in the old, Perkins in the small, FPT (NEF and Cursor) in the medium and big and Cummins in the oldest Steigers.

Read on 3 more paragraphs

The register lists here 275 versions with 17 to 398.9 kW from three- to six-cylinders of 2,539 to 14,994 cm³, PTO outputs from 45 to 473 hp, lift capacities from 742 to 19,620 kg, unladen weights from 2,115 to 24,494 kg, lengths from 3,390 to 6,040 mm and widths from 1,347 to 3,048 mm.

Case IH is New Holland's red sister in the CNH group, number two behind John Deere in North America and, with the Quadtrac, the inventor of the four-track big tractor; the Maxxum and Puma ranges are technically the twins of the Steyr Profi and CVT from St. Valentin.

On used tractors, clutch, transmission and XL cab count on the IH heirs, operating hours, powershift or CVX transmission, front-axle suspension and electronics on the Maxxum and Puma, engine, transmission and tyres or tracks on the Magnum and Steiger; parts run through CNH.

Sources: SpecCodex register, model data: Case IH (weitere Modelle), Case IH (CNH, Hersteller)

Technical data

Engine

Power120 hp (91 kW)correct
Rated speed2,200 rpmcorrect
Torque493 Nmcorrect
Cylinders6correct
Displacement5,880 cm³correct

Dimensions and weights

Length4,600 mmcorrect
Width2,470 mmcorrect
Height2,970 mmcorrect
Wheelbase2,700 mmcorrect
Unladen weight5,820 kgcorrect
Gross vehicle weight9,500 kgcorrect

Drivetrain and chassis

Gearbox16 V/12 R and 32 V/24 Rcorrect

Working data

Fuel tank capacity263 lcorrect

Other data

Linkage categoryCat IIcorrect
PTO speed540/1000 rpmcorrect

Where this model stands

Power-to-weight ratio: 15.6 kW/t (91 kW / 5.8 t)

Power class: Large (100–180 hp)

Stronger than 76% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH MX120 have?

The Case IH MX120 delivers 120 hp.

How much does the Case IH MX120 weigh?

The unladen weight is 5,820 kg.

What is the gross vehicle weight of the Case IH MX120?

9,500 kg.

What engine does the Case IH MX120 have?

6 cylinders, 5,880 cm³ displacement.

What are the dimensions of the Case IH MX120?

4,600 mm × 2,470 mm × 2,970 mm.

When was the Case IH MX120 built?

Production years: 1998.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 17 individual figures for this model. They come from 3 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1] [2] [3]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare