Start › Excavators & compaction › Case › 440CT skid-steer

Case 440CT skid-steer

Series: Other models

Source: https://www.lectura-specs.com/en/model/construction-machiner

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case 440CT skid-steer is a machine built by Case. The engine delivers 89 hp (66 kW). The engine comes from Case. The engine is water-cooled. The model was built in Wichita, Kansas, USA. The fuel is diesel. Rated output across the Case range ranges from 18 to 163 hp; the 440CT skid-steer sits in the middle of that range with 89 hp. Its immediate neighbours are the 930 below it with 80 hp and the IH JX1090U above it with 91 hp. 620 Case models across 22 series are on record. The model is listed under Excavators & compaction. 8 verified figures from 1 source are on file.

Case – other models: the collective page of construction machines 440CT, 580 Super R and 580SK Turbo outside the named ranges, compact loaders and backhoe loaders with 66 to 71 kW Case diesel engines

This page gathers the Case construction machines 440CT compact loader and the backhoe loaders 580 Super R and 580SK Turbo that the register could not assign to a named range. Case Construction Equipment, rooted in Racine, Wisconsin, has belonged to CNH Industrial since the merger with New Holland and, with its 580 backhoe loader series, ranks among North America's defining construction equipment makers; all three machines recorded here run on Case's own diesel engines.

Read on 3 more paragraphs

The register lists here 3 versions with 66 to 71 kW, or 89 to 95 hp; all three run on diesel.

The 580 backhoe loader in its many versions shaped the North American and international market for combined loading and digging work in earthworks for decades, while compact loaders such as the 440CT round out the line-up for confined work on building sites and in landscaping.

When buying used, what counts on these Case machines is the condition of the loader bucket, backhoe arm and stabilisers, the tightness of the hydraulic cylinders, and wear on the undercarriage or tyres; on the 580SK's turbo engine it is also worth checking the turbocharger and its oil supply. Spare parts run through the dense Case and CNH dealer network.

Sources: Kennwerte der Modelle Case (weitere Modelle), Case Construction Equipment (Hersteller)

Technical data

Engine

Engine make	Casecorrect
Fuel	dieselcorrect
Power	89 hp (66 kW)correct
Cooling	water-cooledcorrect

Drivetrain and chassis

Drive	selectable four-wheel drivecorrect

Origin and approval

Plant	Wichita, Kansas, USAcorrect

Frequently asked questions

How much power does the Case 440CT skid-steer have?

The Case 440CT skid-steer delivers 89 hp.

What to check before buying

Check the hour meter against the service records — a replaced instrument is the most common gap.
Compare the data plate and chassis number with the papers.
Load the hydraulics and watch for sag.
Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →

Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →