Technical register for agricultural, construction and commercial machinery · sourced data
Start › Tractors › Case IH › D-Familie/XL-Reihe › 1455 XL

Case IH 1455 XL

Built: 07/1981–12/1996 · Series: D-Familie/XL-Reihe

More machines from model year 1981

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Case IH 1455 XL belongs to the D-Familie/XL-Reihe series. Production: 07/1981–12/1996. The engine delivers 145 hp (107 kW), has 6 cylinders, with a displacement of 6,586 cm³. Torque is 529 Nm. Rated speed is 2,200 rpm. The machine is 4,740 mm long, 2,412 mm wide and 2,940 mm high. The unladen weight is 6,420 kg. The wheelbase measures 2,798 mm. Top speed is 30 km/h. The tank holds 200 litres. The engine is water-cooled. Tyres: front 16.9 R 28 AS, 8 PR, rear 20.8 R 38 AS, 8PR. The model was built in Germany. The fuel is diesel. Its predecessor was the International 1455 XL. The PTO runs at 1000 rpm. Around 7.621 units were built. Rated output across the Case IH range ranges from 31.4 to 500 hp; the 1455 XL sits in the lower part of that range with 145 hp. Its immediate neighbours are the MXM 140 MAXXUM below it with 144 hp and the CVX 150 above it with 150 hp. Rated output across the Case IH range ranges from 36 to 500 hp; here the 1455 XL sits in the lower part of that range with 145 hp. 1222 Case IH models across 76 series are on record.

Case IH 1455 XL: heavy field tractor with a water-cooled 6,586cc six-cylinder diesel, 107 kW of power and 529 Nm of torque

Case IH was formed in 1985 from the merger of J.I. Case and International Harvester's agricultural equipment division; the 1455 XL was introduced before the merger and continued in production into the 1990s. The D family with its XL line occupied the manufacturer's upper power segment with six-cylinder models.

Read on 3 more paragraphs

The 1455 XL carries a water-cooled six-cylinder diesel engine with 6,586 cc of displacement, producing 107 kW (145 hp) and delivering 529 Nm of torque, at a rated 2,200 rpm. At 4,740 mm long, 2,412 mm wide and with a 2,798 mm wheelbase, the machine weighs 6,420 kg; overall height is 2,940 mm and top speed is 30 km/h.

With six cylinders, 6.6 litres of displacement and a weight of 6.42 tonnes, the 1455 XL belongs to the class of heavy field tractors for ploughing, cultivating and haulage on large farms. Torque of 529 Nm allows towing work at low engine speed and suits the machine to heavy towed tillage implements as well.

When buying a used 1455 XL, given the high weight and long production run, the condition of the clutch, rear axle and gearbox seals matters, since these parts wear especially under heavy load over the years. Also worth checking are the tightness of the cooling system and hydraulics, and corrosion on the frame and mudguards, which is common on machines of this age.

Sources: SpecCodex-Register: Kennwerte des Modells Case IH 1455 XL, Case IH (manufacturer)

Technical data

Engine

Fueldieselcorrect
Power145 hp (107 kW)correct
Rated speed2,200 rpmcorrect
Torque529 Nmcorrect
Cylinders6correct
Displacement6,586 cm³correct
Coolingwater-cooledcorrect

Dimensions and weights

Length4,740 mmcorrect
Width2,412 mmcorrect
Height2,940 mmcorrect
Wheelbase2,798 mmcorrect
Ground clearanceca. 499 mmcorrect
Unladen weight6,420 kgcorrect

Drivetrain and chassis

Drivefour-wheel drivecorrect
Gearbox20/9-ZF-Getriebecorrect
Front tyres16.9 R 28 AS, 8 PRcorrect
Rear tyres20.8 R 38 AS, 8PRcorrect
Top speed30 km/hcorrect

Working data

Fuel tank capacity200 lcorrect

Origin and approval

PlantGermanycorrect
Units built7,621correct

Other data

PTO speed1,000 rpmcorrect
PredecessorInternational 1455 XLcorrect

Where this model stands

Power-to-weight ratio: 16.7 kW/t (107 kW / 6.4 t)

Power class: Large (100–180 hp)

Stronger than 82% of the tractors in the register — out of 15,663 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case IH 1455 XL have?

The Case IH 1455 XL delivers 145 hp.

How much does the Case IH 1455 XL weigh?

The unladen weight is 6,420 kg.

What engine does the Case IH 1455 XL have?

6 cylinders, 6,586 cm³ displacement, Diesel.

How fast does the Case IH 1455 XL go?

Top speed is 30 km/h.

What are the dimensions of the Case IH 1455 XL?

4,740 mm × 2,412 mm × 2,940 mm.

When was the Case IH 1455 XL built?

Production years: 07/1981–12/1996.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Check front and rear tyre sizes: mismatched pairs strain the drivetrain.
  • Shift the gearbox cold and warm — jumps only show up at temperature.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 28 individual figures for this model. They come from 4 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: Wikibooks Traktorenlexikon (CC BY-SA 4.0) (retrieved August 2026) · Tractor & Construction Plant Wiki (CC BY-SA 3.0) (retrieved August 2026) · Latvian open data portal (retrieved August 2026) · Values adopted and presented in our own form; changes from the source are possible. · How we check the data

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare