Case IH JX70 MaxPro
Built: 2013-2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2013, the Case IH (cnh) JX70 MaxPro is a tractor from Case IH (cnh). The engine is rated at 48 kW.
The fuel is diesel. Within the range, rated power spans from 17 to 400 kW; with 48 kW, the JX70 MaxPro sits at the bottom end. Directly alongside are the CS63 with 47 kW below and the 743 with 50 kW above.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 65 hp (48 kW)correct |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Origin and approval
| Plant | Ankara, Turkeycorrect |
|---|
Frequently asked questions
How much power does the Case IH JX70 MaxPro have?
The Case IH JX70 MaxPro delivers 65 hp.
When was the Case IH JX70 MaxPro built?
Production years: 2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.