Case IH JX65C
Built: 2013-2013 · Series: Other models
More machines from model year 2013
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Built in 2013, the Case IH (cnh) JX65C is a tractor from Case IH (cnh). The engine is rated at 48 kW.
The fuel is diesel. Within the range, rated power spans from 17 to 400 kW; with 48 kW, the JX65C sits at the bottom end. Directly alongside are the CS63 with 47 kW below and the 743 with 50 kW above.
Technical data
Engine
| Fuel | dieselcorrect |
|---|---|
| Power | 65 hp (48 kW)correct |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Origin and approval
| Plant | Ankara, Turkeycorrect |
|---|
Frequently asked questions
How much power does the Case IH JX65C have?
The Case IH JX65C delivers 65 hp.
When was the Case IH JX65C built?
Production years: 2013.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.