StartTractorsCase IH › C70

Case IH C70

Built: 1998-2002 · Series: Other models

Built in 1998-2002, the Case IH (cnh) C70 is a tractor from Case IH (cnh). It is powered by a four-cylinder engine producing 44 kW. Rated power is reached at 2,200 rpm.

It runs on diesel; the engine is water-cooled. It was replaced by the McCormick C70. Within the range, rated power spans from 17 to 400 kW; with 44 kW, the C70 sits at the bottom end. Directly alongside are the DX55 Farmall with 41 kW below and the CS63 with 47 kW above.

Technical data

Engine

Engine makePerkinscorrect
Engine model1,004.42correct
Fueldieselcorrect
Power59 hp (44 kW)correct
Rated speed2,200 rpmcorrect
Cylinders4correct
Displacement258 cu incorrect
Bore4.05 in (102,9 mm)correct
Stroke5 in (127 mm)correct
Coolingwater-cooledcorrect

Dimensions and weights

Wheelbase84.3 in (2141,2 mm)correct

Drivetrain and chassis

Driverear-wheel driveWDcorrect

Working data

Fuel tank capacity20 galcorrect
PTO speed540/1000correct
Linkage categoryCat I/IIcorrect

Origin and approval

PlantDoncaster, Englandcorrect
SuccessorMcCormick C70correct

Frequently asked questions

How much power does the Case IH C70 have?

The Case IH C70 delivers 59 hp.

What engine does the Case IH C70 have?

4 cylinders, diesel.

When was the Case IH C70 built?

Production years: 1998-2002.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 21 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare