Case IH 585
Built: 1985-1990 · Series: Other models
The Case IH (cnh) 585 is a tractor built in 1985-1990. 39 kW is available.
It runs on diesel; the engine is water-cooled. This model followed the International 584, before the Case IH 595 took over. Within the range, rated power spans from 17 to 400 kW; with 39 kW, the 585 sits at the bottom end. Directly alongside are the Maxxfarm 50 with 35 kW below and the DX55 Farmall with 41 kW above.
Technical data
Engine
| Engine make | Case IHcorrect |
|---|---|
| Fuel | dieselcorrect |
| Power | 52 hp (39 kW)correct |
| Cooling | water-cooledcorrect |
Drivetrain and chassis
| Drive | rear-wheel driveWD/MFWDcorrect |
|---|
Origin and approval
| Plant | Doncaster, Englandcorrect |
|---|---|
| Predecessor | International 584correct |
| Successor | Case IH 595correct |
Frequently asked questions
How much power does the Case IH 585 have?
The Case IH 585 delivers 52 hp.
When was the Case IH 585 built?
Production years: 1985-1990.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.