StartRoad constructionCase › DV204

Case DV204

Series: Case Vibratory Smooth Drum Roller

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the DV204, Case offers a model from the Case Vibratory Smooth Drum Roller series. The engine delivers 35.8 kW. The machine is 1,396 mm wide. The unladen weight is 3,501.7 kg. Ground clearance is 304.8 mm. Top speed is 10 km/h. The tank holds 70 litres. The hydraulic tank holds 37.9 litres. The oil fill is 6.4 litres. The electrical system runs on 12 V. The engine fitted is the D2011 L3. The Case Vibratory Smooth Drum Roller series covers 10 models. Rated output within it ranges from 23.1 to 114.8 kW; the DV204 sits at the bottom of that range with 35.8 kW. Its immediate neighbours are the DV202 below it with 23.1 kW and the SV208D above it with 55.4 kW. 620 Case models across 22 series are on record. The model is listed under Road construction. 11 verified figures from 1 source are on file.

Technical data

Engine

Engine modelD2011 L3correct
Power35.8 kWcorrect
Engine oil capacity6.4 lcorrect

Dimensions and weights

Width1,396correct
Ground clearance304.8correct
Unladen weight3,501.7 kgcorrect

Drivetrain and chassis

Top speed10 km/hcorrect
System voltage12 Vcorrect

Working data

Hydraulic oil capacity37.9 lcorrect
Fuel tank capacity70 lcorrect

Other data

Height2,667correct

Where this model stands

Power-to-weight ratio: 10.2 kW/t (36 kW / 3.5 t)

Stronger than 23% of the road construction in the register — out of 669 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case DV204 have?

The Case DV204 delivers 35.8 kW.

How much does the Case DV204 weigh?

The unladen weight is 3,502 kg.

How fast does the Case DV204 go?

Top speed is 10 km/h.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Asphalt paver in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare