StartWheel loadersCase › 650K LT

Case 650K LT

Series: Case Crawler Loader

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 650K LT from Case is part of the Case Crawler Loader series. The engine delivers 55.8 kW, with a displacement of 4,490.1 cm³. The unladen weight is 8,255.4 kg. Ground clearance is 442 mm. The tank holds 189.3 litres. The pump delivers 78.7 l/min. The hydraulic tank holds 75.7 litres. The cooling system holds 75.7 litres. The oil fill is 54.5 litres. The electrical system runs on 12 V. The engine fitted is the family III 445T/M2 diesel Tier II certified. Rated output across the Case range ranges from 8.9 to 475.8 kW; the 650K LT sits at the bottom of that range with 55.8 kW. Its immediate neighbours are the SV208D below it with 55.4 kW and the 580M above it with 56.7 kW. 620 Case models across 22 series are on record. The model is listed under Wheel loaders. 12 verified figures from 1 source are on file.

Technical data

Engine

Engine modelfamily III 445T/M2 diesel Tier II certifiedcorrect
Power55.8 kWcorrect
Displacement4,490.1 cm³correct
Coolant capacity75.7 lcorrect
Engine oil capacity54.5 lcorrect

Dimensions and weights

Ground clearance442correct
Unladen weight8,255.4 kgcorrect

Drivetrain and chassis

System voltage12 Vcorrect

Working data

Pump flow78.7 l/mincorrect
Hydraulic oil capacity75.7 lcorrect
Fuel tank capacity189.3 lcorrect

Other data

Height2,773.7correct

Where this model stands

Power-to-weight ratio: 6.8 kW/t (56 kW / 8.3 t)

Stronger than 25% of the wheel loaders in the register — out of 1,253 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Case 650K LT have?

The Case 650K LT delivers 55.8 kW.

How much does the Case 650K LT weigh?

The unladen weight is 8,255 kg.

What engine does the Case 650K LT have?

4,490 cm³ displacement.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Wheel loader in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare