Case 586H
Series: Case Forklift
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Engine
| Engine model | FPT F5HFL463Dcorrect |
|---|---|
| Power | 50.7 kWcorrect |
| Rated speed | 2,200 rpmcorrect |
| Speed at max. torque | 1,400 rpmcorrect |
| Cylinders | 4correct |
| Displacement | 3,400.3 cm³correct |
Dimensions and weights
| Length | 4,937.8correct |
|---|---|
| Width | 2,118.4correct |
| Wheelbase | 2,130.6correct |
| Ground clearance | 260.1correct |
| Unladen weight | 6,206 kgcorrect |
Working data
| Pump flow | 68.1 l/mincorrect |
|---|
Where this model stands
Power-to-weight ratio: 8.2 kW/t (51 kW / 6.2 t)
Stronger than 85% of the forklift trucks in the register — out of 323 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Case 586H have?
The Case 586H delivers 50.7 kW.
How much does the Case 586H weigh?
The unladen weight is 6,206 kg.
What engine does the Case 586H have?
4 cylinders, 3,400 cm³ displacement.
What are the dimensions of the Case 586H?
4,938 mm × 2,118 mm.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 12 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Forklift in 3D section
Turn the model, look inside and click an assembly — each one is explained.