Technical register for agricultural, construction and commercial machinery · sourced data
StartTrailersCampa › CP6000DR

Campa CP6000DR

Built: 1983-1983 · Series: Other models

More machines from model year 1983

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Campa CP6000DR is a machine built by Campa. Production: 1983-1983. The machine is 2,490 mm wide. The unladen weight is 4,980 kg. The wheelbase measures 4,300 mm. Top speed is 100 km/h. The gross vehicle weight is 6,000 kg. Unladen weight across the Campa range ranges from 455 to 9,740 kg; the CP6000DR sits in the middle of that range with 4,980 kg. Its immediate neighbours are the VWZ80 below it with 4,780 kg and the VWZ100 above it with 5,260 kg. 81 Campa models across 2 series are on record. The model is listed under Trailers. 7 verified figures from 1 source are on file.

Campa - other models: CP range outside the named series, 64 versions, kerb weight 455 to 9,740 kg, gross weights up to 18.5 t

Campa appears in the register with a broad range of trailers, from light versions to medium-weight twin-axle models. This collective page lists all Campa versions that could not be assigned to a separately named series; the type designations of the CP range combine a four-digit number with letter suffixes for different trim variants.

Read on 3 more paragraphs

The register lists 64 versions with kerb weights from 455 to 9,740 kg, gross weights from 1,000 to 18,500 kg and widths from 1,500 to 2,580 mm; lengths range from 6,770 to 13,280 mm.

The span from light trailers to models with an 18.5-tonne gross weight covers both private and commercial needs, from general cargo to livestock trailers; in the European trailer market, Campa competes with numerous smaller and mid-sized makers of similar weight classes that rarely offer an extensive service network outside their home country.

When buying used, on the lighter models check the coupling head, tyres and frame corrosion; on the heavier versions also check the state of axles and brakes, the tightness of any hydraulics, and corrosion at load-bearing welds. Spares for older models can often now only be sourced directly from the manufacturer, so it is worth asking the seller or the manufacturer directly about spare-parts availability before agreeing on a price.

Sources: Kennwerte der Modelle Campa Anhänger (weitere Modelle)

Technical data

Dimensions and weights

Width2,490 mmcorrect
Wheelbase4,300 mmcorrect
Unladen weight4,980 kgcorrect
Gross vehicle weight6,000 kgcorrect

Drivetrain and chassis

Top speed100 km/hcorrect

Frequently asked questions

How much does the Campa CP6000DR weigh?

The unladen weight is 4,980 kg.

What is the gross vehicle weight of the Campa CP6000DR?

6,000 kg.

Up to what speed is the Campa CP6000DR approved?

Approved up to 100 km/h.

When was the Campa CP6000DR built?

Production years: 1983.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Work the gross weight against the towing vehicle before buying.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare