Burg BPDA16M
Built: 1986-1986 · Series: Trailers over 10 t (Class O4)
More machines from model year 1986
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Burg trailers over 10 t (Class O4) – the Dutch tank and silo semi-trailer builder in the EU heavy-haulage class: 214 versions with B.P.A./B.P.O. type codes, unladen weights 2,380 to 26,360 kg, gross weights up to 49 t
Class O4 groups together, according to registration data from the Netherlands and Finland, all trailers with a permissible gross weight over 10 tonnes. Burg is a Dutch manufacturer best known for tank and silo semi-trailers; the register also lists type codes such as A-2-20, A-3-27 or B.P.O., pointing to tipper and flatbed bodies, alongside the B.P.A. series, Burg's own designation for part of its tank-trailer programme. The codes visibly follow a pattern of axle count and two dimensions, though Burg does not disclose the exact reading.
Read on 3 more paragraphs
The register lists 214 versions with unladen weights from 2,380 to 26,360 kg and permissible gross weights from 11,300 to 49,000 kg. Lengths are recorded for 132 of the 214 vehicles and range from 1,202 to 14,100 mm, width for all 214 versions from 2,190 to 3,000 mm.
With its focus on tank and silo trailers, Burg serves a segment where, alongside the large European trailer builders, specialised manufacturers with sheet-metal and welding expertise are in demand; the short lengths at the lower end of the span likely come from converter dollies or lead axles that form a multi-part combination together with a semi-trailer.
For a used tank or silo trailer, what matters is the tightness of the vessel, manhole covers and outlet fittings, the corrosion condition of the frame and vessel supports, the axles and EBS braking system, and the air suspension. For tipper and flatbed variants, hydraulic cylinders, sideboards and a complete inspection history also count, since parts for older Burg bodies are usually only available through the manufacturer itself.
Sources: Kennwerte der Modelle Burg Anhänger über 10 t (Klasse O4)
Technical data
Dimensions and weights
| Width | 2,500 mmcorrect |
|---|---|
| Wheelbase | 1,250 mmcorrect |
| Unladen weight | 6,380 kgcorrect |
| Gross vehicle weight | 16,000 kgcorrect |
Drivetrain and chassis
| Wheels | 2correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Burg BPDA16M weigh?
The unladen weight is 6,380 kg.
What is the gross vehicle weight of the Burg BPDA16M?
16,000 kg.
Up to what speed is the Burg BPDA16M approved?
Approved up to 100 km/h.
When was the Burg BPDA16M built?
Production years: 1986.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.