Buca BC0ZN - 2 / 32
Built: 2003-2003 · Series: Other models
More machines from model year 2003
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Buca – other models: the collector page for trailers and semi-trailers outside the named series, BC and BCOVS types, 310 to 18,130 kg kerb weight, up to 46,000 kg gross weight
This page gathers 61 Buca models that the register could not assign to a named series. The type list runs from short BC codes with a number suffix such as BC-14 or BC-20 through the BCA, BCO and BCOZ ranges to the multi-part BCOVS and BCOVG types, each carrying axle count and load-capacity class within the code.
Read on 3 more paragraphs
The register lists 61 versions here with a kerb weight of 310 to 18,130 kg and a gross weight of 1,000 to 46,000 kg. Widths range from 1,630 to 2,600 mm, lengths from 6,620 to 13,960 mm.
The wide weight spread shows that the page covers everything from light single-axle trailers to heavy multi-axle semi-trailers, as used in freight and building-material haulage. Such trailers and semi-trailers are common above all in commercial freight transport and construction supply.
When buying used, check the frame and axles for rust, cracks and play, and on the heavier versions also the braking system and the air-supply connections. The load area, sides and lashing points should be checked for wear; parts for common axles, braking systems and couplings are available from commercial-vehicle dealers. On semi-trailers, the air and electrical connection lines and the condition of the rear underrun protection should also be checked. Tyre condition and wheel-nut torque deserve particular attention on the heavier semi-trailer versions, given the point loads involved.
Technical data
Dimensions and weights
| Length | 13,720 mmcorrect |
|---|---|
| Width | 2,550 mmcorrect |
| Wheelbase | 9,910 mmcorrect |
| Unladen weight | 8,550 kgcorrect |
| Gross vehicle weight | 32,000 kgcorrect |
Drivetrain and chassis
| Top speed | 100 km/hcorrect |
|---|
Frequently asked questions
How much does the Buca BC0ZN - 2 / 32 weigh?
The unladen weight is 8,550 kg.
What is the gross vehicle weight of the Buca BC0ZN - 2 / 32?
32,000 kg.
Up to what speed is the Buca BC0ZN - 2 / 32 approved?
Approved up to 100 km/h.
What are the dimensions of the Buca BC0ZN - 2 / 32?
13,720 mm × 2,550 mm.
When was the Buca BC0ZN - 2 / 32 built?
Production years: 2003.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.