Briab BRIABS2P2078
Built: 1974-1974 · Series: Other models
More machines from model year 1974
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Briab – other models: the collective page of Finnish semi-trailers, timber trailers and swap-body trailers outside the named ranges, SB and SBB ranges, 3.8 to 15.95 t unladen weight, up to 50 t gross weight
This page gathers the Briab trailers the register could not assign to a named range – a Finnish programme of semi-trailers (puoliperävaunu), timber-haulage trailers (puutavaraperävaunu) and swap-body trailers (vaihtolava perävaunu), recognisable by the SB and SBB ranges and the Kilaf/Kilafors model family. Type designations such as SBB4A-38-105 combine the axle count (3 or 4) with codes for the body type (A, P, T, C) and a running number for length or equipment level; the Kilaf range is intended specifically for round-timber transport.
Read on 3 more paragraphs
The register lists here 142 versions with unladen weights from 3,800 to 15,950 kg, gross weights from 17,000 to 50,000 kg, lengths from 7,450 to 19,280 mm and widths from 2,400 to 3,000 mm.
Trailers of this size shape Finnish round-timber logistics and heavy haulage to sawmills and pulp mills, where long Finnish vehicle combinations allow economical payloads; Briab competes here with other Finnish builders of timber and swap-body trailers.
On a used example, the condition of frame and stanchions, axles, brakes and air suspension, on timber trailers the stanchion posts and load beds, on swap-body trailers the body locking system, and a complete service history count; spare parts run through the Briab service network and the Finnish specialist trailer trade.
Sources: Kennwerte der Modelle Briab (weitere Modelle), Traficom (Finnland)
Technical data
Dimensions and weights
| Length | 10,250 mmcorrect |
|---|---|
| Width | 2,480 mmcorrect |
| Wheelbase | 5,700 mmcorrect |
| Unladen weight | 5,000 kgcorrect |
| Gross vehicle weight | 20,000 kgcorrect |
Drivetrain and chassis
| Wheels | 8correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Briab BRIABS2P2078 weigh?
The unladen weight is 5,000 kg.
What is the gross vehicle weight of the Briab BRIABS2P2078?
20,000 kg.
Up to what speed is the Briab BRIABS2P2078 approved?
Approved up to 100 km/h.
What are the dimensions of the Briab BRIABS2P2078?
10,250 mm × 2,480 mm.
When was the Briab BRIABS2P2078 built?
Production years: 1974.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1987/SLB3A-30-60/70/
BRIAB KILAF 4A36-103
BRIAB Kilaf Sblb4x361280
BRIAB vaihtolava perävaunu
BRIAB, puoliperävaunu
Briab
Briab Kilaf Sblb4x36127
Briab Puutavaraperävaunu
KILAF 4A36-103
KILAFSBLB4FTS36125
Kilaf Sblb4x36127
Kilaf Sblb4x361280
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.