Branson 3510i 4WD
Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
As a tractor, the Branson 3510i belongs to the Branson 4WD Tractor series. 36 hp (26.1 kW) is what the three-cylinder engine gets out of 1.7 litres. Rated power arrives at 2,600 rpm — the engine pulls from low down rather than needing to be revved.
Unladen, it tips the scales at 1,682 kg.
Within the range, rated power spans from 29.4 to 65.9 hp; with 35.5 hp, the 3510i sits at the bottom end. Directly alongside are the 2910i with 29.4 hp below and the F3550 with 37 hp above.
Technical data
Engine
| Power | 35.5 hp (26.1 kW)correct |
|---|---|
| Rated speed | 2,600 rpmcorrect |
| Cylinders | 3correct |
| Displacement | 1,741.9 cm³correct |
| Aspiration | naturally aspiratedcorrect |
Dimensions and weights
| Unladen weight | 1,681.9 kgcorrect |
|---|
Drivetrain and chassis
| Gearbox type | synchromesh gearboxcorrect |
|---|---|
| Forward gears | 12correct |
| Reverse gears | 12correct |
Working data
| Pump flow | 31.8 l/mincorrect |
|---|---|
| Fuel tank capacity | 41.6 lcorrect |
Other data
| Height | 2,414correct |
|---|
Where this model stands
Power-to-weight ratio: 15.5 kW/t (26 kW / 1.7 t)
Power class: Compact (< 40 hp)
Stronger than 23% of the tractors in the register — out of 15,240 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Branson 3510i have?
The Branson 3510i delivers 35.5 hp.
How much does the Branson 3510i weigh?
The unladen weight is 1,682 kg.
What engine does the Branson 3510i have?
3 cylinders, 1,742 cm³ displacement.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 13 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.