Boro GAT
Built: 2009-2009 · Series: Other models
More machines from model year 2009
Boro – other models: car-transporter trailers outside the named ranges, 27 versions, unladen weight 360 to 2,000 kg, gross vehicle weight up to 3.5 tonnes
Boro builds utility trailers for transporting vehicles and machinery, as shown by the model names Autotransporter, Atlas 4x2 and 6x2 on this collective page. It gathers versions the register could not assign to a narrower range; the 4x2 and 6x2 suffixes denote the axle count and layout of the heavier models.
Read on 3 more paragraphs
The register lists here 27 versions with unladen weights from 360 to 2,000 kg, gross vehicle weights from 1,500 to 3,500 kg, lengths from 4,550 to 10,830 mm and widths from 2,000 to 2,550 mm.
Car-transporter trailers of this size serve commercial and private transport of cars, small machinery and work equipment, complementing suppliers such as Böckmann, Humbaur and Brian James Trailers in the commercial trailer market; the twin- and triple-axle 6x2 versions allow higher payloads for heavier vehicles. On the larger versions with hydraulic ramp lowering, the design considerably eases loading and unloading of low-slung machines such as excavators or mini-excavators compared with rigid ramps.
When buying used, check the condition and load capacity of the loading platform (warping, rust at the welds), the loading ramps and their locking, the braking system and overrun hitch, and the tyres and wheel bearings. Spare parts for ramps, winches and lashing points are available from trailer dealers.
Technical data
Dimensions and weights
| Length | 10,360 mmcorrect |
|---|---|
| Width | 2,210 mmcorrect |
| Wheelbase | 8,400 mmcorrect |
| Unladen weight | 900 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Boro GAT weigh?
The unladen weight is 900 kg.
What is the gross vehicle weight of the Boro GAT?
3,500 kg.
Up to what speed is the Boro GAT approved?
Approved up to 100 km/h.
What are the dimensions of the Boro GAT?
10,360 mm × 2,210 mm.
When was the Boro GAT built?
Production years: 2009.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.