Bolle BE 3582A
Built: 2022-2022 · Series: BE
More machines from model year 2022
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bolle BE – trailers of the BE series: tipper and platform models from light-duty to the 10.5-tonne version, 355 to 4,460 kg unladen weight, 3,500 to 10,500 kg gross weight
The BE series gathers trailers from the Bolle brand, consistently designated with the prefix B.E. or BE followed by a four-digit code; the digits encode the construction size and axle configuration, while letter suffixes such as S, T, E or A denote individual equipment variants. The series spans from small single-axle trailers to tandem-axle versions for heavier loads.
Read on 3 more paragraphs
The register lists 36 versions with an unladen weight of 355 to 4,460 kg and a gross weight of 3,500 to 10,500 kg. Lengths range from 3,530 to 11,640 mm and widths from 1,800 to 2,550 mm.
BE-series trailers therefore cover a wide field of use, from light-duty transport to commercial haulage of machinery and materials, and compete with other European makers of tipper and platform trailers in comparable weight classes. The tipping function particularly simplifies unloading bulk materials such as soil, sand or gravel on building sites and in agriculture.
When buying used, check the frame and load bed for corrosion and deformation, and on tipper versions also the hydraulic cylinder, tipping hinge and seals. Standard checks include the overrun brake coupling, brakes and tyres, as well as the lighting system and the condition of the side boards and locks. Spare parts for axles, the overrun coupling and hydraulics are available through the general trailer parts trade.
Sources: Kennwerte der Modelle Bolle BE
Technical data
Dimensions and weights
| Length | 9,600 mmcorrect |
|---|---|
| Width | 2,220 mmcorrect |
| Wheelbase | 6,350 mmcorrect |
| Unladen weight | 890 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Bolle BE 3582A weigh?
The unladen weight is 890 kg.
What is the gross vehicle weight of the Bolle BE 3582A?
3,500 kg.
Up to what speed is the Bolle BE 3582A approved?
Approved up to 100 km/h.
What are the dimensions of the Bolle BE 3582A?
9,600 mm × 2,220 mm.
When was the Bolle BE 3582A built?
Production years: 2022.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
B.E. 3512
B.E. 3512 CH
B.E. 3513 S
B.E. 3515
B.E. 3518E
B.E. 3518S
B.E. 3519
B.E. 3520
B.E. 3520 T
B.E. 3520T
B.E. 3525
B.E. 3542E
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.