Blumhardt BWB L3
Built: 1962-1962 · Series: Other models
More machines from model year 1962
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Blumhardt – other trailers: the collective page of models from the historic Wuppertal semi-trailer builder outside the named ranges, 1.3 to 7.75 t unladen weight, up to 39 t gross weight
This page gathers the Blumhardt trailers and semi-trailers the register could not assign to a named range. Blumhardt was a German semi-trailer builder based in Wuppertal; the models range from semi-trailers such as the SAL 24.10.107Z or BWB 23.27 through the tank semi-trailer CONT SAL 40.18E to special bodies such as the TLR VAN 10T or the ANTENNEWAGEN for transport and communication tasks.
Read on 3 more paragraphs
The register lists here 17 versions with unladen weights from 1,300 to 7,750 kg, gross weights from 2,700 to 39,000 kg, lengths from 6,200 to 13,800 mm and widths from 2,180 to 2,550 mm.
The span from light trailers to heavy semi-trailers shows the maker's broad production programme between classic goods transport and special vehicles; as the brand is no longer active on the market, these vehicles today are found mostly as older stock in the used market and at specialist commercial-vehicle firms, often after many years of service and several changes of owner.
On used units, especially these older vehicles, the condition of frame and chassis rails against rust-through counts in particular, axles and brake system, the condition of the bodies and side boards, and the function of the lighting; as the maker no longer exists, parts must be sourced through independent commercial-vehicle suppliers or as reproductions.
Technical data
Dimensions and weights
| Length | 6,200 mmcorrect |
|---|---|
| Width | 2,450 mmcorrect |
| Wheelbase | 2,870 mmcorrect |
| Unladen weight | 2,450 kgcorrect |
| Gross vehicle weight | 5,400 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Blumhardt BWB L3 weigh?
The unladen weight is 2,450 kg.
What is the gross vehicle weight of the Blumhardt BWB L3?
5,400 kg.
Up to what speed is the Blumhardt BWB L3 approved?
Approved up to 100 km/h.
What are the dimensions of the Blumhardt BWB L3?
6,200 mm × 2,450 mm.
When was the Blumhardt BWB L3 built?
Production years: 1962.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
ANTENNEWAGEN
BAUMA IV
BAUMA VI-H 24.30/60Z
BWB 2327
CONT SAL 40 18 E
CONT SAL 40 24 F
CONT.-SAL40.24E
H 24.30/60Z
L 22/82 E
L16/580
L4
SAL 24 10 107 Z
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.