Bin MASTER T 35 6X2
Built: 1999-2004 · Series: Other models
More machines from model year 1999
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Bin – other models: the collective page of Master T35 versions outside the named ranges, 6x2 axle layout, 2,800 cc, 3,680 to 6,000 kg, 9,750 to 9,770 mm length
This page gathers the models the register lists as “Bin” outside the named ranges, all of them versions of the Master T35 range in the 6x2 axle layout, including the T35D variant with the diesel designation in its name. The three-axle layout with a steered trailing axle (6x2) is common on medium-duty distribution and body trucks because it allows a long load area at a comparatively low gross weight.
Read on 3 more paragraphs
The register lists here 3 versions with four cylinders and 2,800 cc displacement, unladen weights from 3,680 to 5,560 kg, a gross weight of 6,000 kg, lengths from 9,750 to 9,770 mm and widths from 2,350 to 2,400 mm.
At almost ten metres long yet only 6,000 kg gross weight, the Master T35 is one of the slender bodied chassis used in distribution work by drivers holding a category C1 licence and for bulky but light loads, such as furniture, swap bodies or advertising surfaces along the long side of the vehicle.
On these light, long-wheelbase chassis, the condition of the four-cylinder diesel, the tracking of the steered trailing axle, rust on the long ladder frame, and brakes and suspension under distribution use all count; parts supply depends on the body builder's own distribution network, so checking the service history and the wear of the trailing-axle steering linkage pays off before buying.
Technical data
Engine
| Cylinders | 4correct |
|---|
Dimensions and weights
| Length | 9,750 mmcorrect |
|---|---|
| Width | 2,370 mmcorrect |
| Wheelbase | 6,700 mmcorrect |
| Unladen weight | 5,560 kgcorrect |
| Gross vehicle weight | 6,000 kgcorrect |
Drivetrain and chassis
| Wheels | 6correct |
|---|
Frequently asked questions
How much does the Bin MASTER T 35 6X2 weigh?
The unladen weight is 5,560 kg.
What is the gross vehicle weight of the Bin MASTER T 35 6X2?
6,000 kg.
What engine does the Bin MASTER T 35 6X2 have?
4 cylinders.
What are the dimensions of the Bin MASTER T 35 6X2?
9,750 mm × 2,370 mm.
When was the Bin MASTER T 35 6X2 built?
Production years: 1999-2004.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.