Bfz BFZ-35/50
Built: 2021-2021 · Series: Other models
More machines from model year 2021
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
BFZ – further models: the collective page for trailers outside the named series, 35/53, BFZ 35/53 and BFZ-35/50, 720 to 830 kg unladen weight, 3,500 kg gross weight
This page collects the BFZ trailers that the register does not assign to any named series. Three types are listed: 35/53, BFZ 35/53 and BFZ-35/50. All three stand in the register as separate entries, and the designations themselves give no indication of a model year sequence.
Read on 4 more paragraphs
The register lists 3 versions here with unladen weights from 720 to 830 kg, a gross weight of 3,500 kg each, and widths from 2,100 to 2,120 mm; one of the three versions also has a length of 6,600 mm.
With a gross weight of 3,500 kg, these trailers sit at the upper limit of EU trailer category O2, which begins at 750 kg and requires an overrun brake throughout. Towing only needs licence category B as long as the combination's gross weight stays below 3,500 kg, otherwise category BE becomes necessary.
With an unladen weight of around 720 to 830 kg against a gross weight of 3.5 tonnes, these trailers offer a high payload relative to their own weight and fall into the class that can still be towed on a category B or BE licence.
When buying used, check the condition of the axle and wheel bearings, the operation of the overrun brake and brake linkage, rust on the chassis and drawbar, and the condition of lighting and the electrical connector as well as tyres and wheels. Spare parts for such small makes usually come through independent trailer workshops rather than a manufacturer network; given the high permitted payload it is also worth checking the chassis and axle mounts.
Technical data
Dimensions and weights
| Length | 6,600 mmcorrect |
|---|---|
| Width | 2,100 mmcorrect |
| Wheelbase | 3,800 mmcorrect |
| Unladen weight | 830 kgcorrect |
| Gross vehicle weight | 3,500 kgcorrect |
Drivetrain and chassis
| Wheels | 4correct |
|---|---|
| Top speed | 100 km/hcorrect |
Frequently asked questions
How much does the Bfz BFZ-35/50 weigh?
The unladen weight is 830 kg.
What is the gross vehicle weight of the Bfz BFZ-35/50?
3,500 kg.
Up to what speed is the Bfz BFZ-35/50 approved?
Approved up to 100 km/h.
What are the dimensions of the Bfz BFZ-35/50?
6,600 mm × 2,100 mm.
When was the Bfz BFZ-35/50 built?
Production years: 2021.
What to check before buying
- Search the frame and welds at the axle mounts — that is where cracks start.
- Check the brakes and the last inspection in the papers.
- Work the gross weight against the towing vehicle before buying.
- Compare the chassis number with the papers.
- Look at the floor, cover or body from the inside — rust does not show from outside.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.