Bernardin M2160

Built: 2002-2010 · Series: Other models

The photo shows the M23 from the same series. Source: https://en.wikipedia.org/wiki/File:Bernardino_Ramazzini.jpg

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bernardin M2160 is a machine built by Bernardin. Production: 2002-2010. The engine delivers 280 hp (210 kW). The engine comes from Volvo Penta, Mercedes Benz. The model was built in Argentina. The fuel is diesel. Rated output across the Bernardin range ranges from 160 to 280 hp; the M2160 sits at the top of that range with 280 hp. Its immediate neighbours are the B260 DT-A below it with 260 hp. 10 Bernardin models across 2 series are on record. The model is listed under Harvesting machinery. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine makeVolvo Penta, Mercedes Benzcorrect
Fueldieselcorrect
Power280 hp (210 kW)correct

Origin and approval

PlantArgentinacorrect
Predecessornot statedcorrect

Frequently asked questions

How much power does the Bernardin M2160 have?

The Bernardin M2160 delivers 280 hp.

When was the Bernardin M2160 built?

Production years: 2002-2010.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 11 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Combine harvester in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare