Technical register for agricultural, construction and commercial machinery · sourced data
Scanner Parts Sign in
Start › Excavators & compaction › Bell › 315SJ backhoe

Bell 315SJ backhoe

Series: Other models

Source: https://commons.wikimedia.org/wiki/File:Bell_315SG_Turbo_4x4

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The 315SJ backhoe comes from Bell. The engine delivers 92 hp (69 kW). The engine comes from John Deere. The engine is water-cooled. The model was built in South Africa. The fuel is diesel. Rated output across the Bell range ranges from 90 to 420 hp; the 315SJ backhoe sits at the bottom of that range with 92 hp. Its immediate neighbours are the 904AF below it with 90 hp and the 1226 above it with 115 hp. 31 Bell models across 5 series are on record. The model is listed under Excavators & compaction. 8 verified figures from 1 source are on file.

Technical data

Engine

Engine makeJohn Deerecorrect
Fueldieselcorrect
Power92 hp (69 kW)correct
Coolingwater-cooledcorrect

Drivetrain and chassis

Driveselectable four-wheel drivecorrect

Origin and approval

PlantSouth Africacorrect

Frequently asked questions

How much power does the Bell 315SJ backhoe have?

The Bell 315SJ backhoe delivers 92 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Sources: [1]

Excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare