Bell Equipment 315SG

Series: Bell Equipment Loader Backhoe

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Bell Equipment 315SG belongs to the Bell Equipment Loader Backhoe series. The engine delivers 85.7 hp (63 kW). The tank holds 136.3 litres. The gearbox has 4 forward gears. There are also 4 reverse gears. The pump delivers 136.3 l/min. Working pressure is 250 bar. The engine fitted is the 4045T. Rated output within this group ranges from 16.7 to 2,331.9 hp; the 315SG sits at the bottom of that range with 85.7 hp. Its immediate neighbours are the ZL1001 below it with 85.2 hp and the S330 above it with 86.2 hp. The model is listed under Wheel loaders. 10 verified figures from 1 source are on file.

Technical data

Engine

Engine model4045Tcorrect
Power85.7 hp (63 kW)correct
Aspirationturbochargedcorrect

Drivetrain and chassis

Gearbox typepowershift transmissioncorrect
Forward gears4correct
Reverse gears4correct

Working data

Pump flow136.3 l/mincorrect
Hydraulic pressure250correct
Fuel tank capacity136.3 lcorrect

Frequently asked questions

How much power does the Bell Equipment 315SG have?

The Bell Equipment 315SG delivers 85.7 hp.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Wheeled excavator in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare