Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Volkswagen Vw › CRAFTER › VW CRAFTER AUT

Volkswagen Vw VW CRAFTER AUT

Built: 2018 · Series: CRAFTER

More machines from model year 2018

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

With the VW CRAFTER AUT, Volkswagen Vw offers a model from the CRAFTER series. Production: 2018. The engine delivers 130 kW, has 4 cylinders, with a displacement of 1,968 cm³. The vehicle is 7,035 mm long and 2,200 mm wide. The unladen weight is 2,726 kg. The gross vehicle weight is 3,500 kg. The CRAFTER series covers 6 models. Rated output within it ranges from 65 to 130 kW; the VW CRAFTER AUT sits at the top of that range with 130 kW. Its immediate neighbours are the Crafter 4MOTION below it with 120 kW. Unladen weight within it ranges from 2,310 to 2,945.5 kg; here the VW CRAFTER AUT sits in the upper part of that range with 2,726 kg. 114 Volkswagen Vw models across 7 series are on record.

VW Crafter – first generation based on the Sprinter, built by Daimler in Düsseldorf and Ludwigsfelde: 65 to 130 kW, TDI four-cylinder engines, 2,310 to 2,945.5 kg kerb weight, 4Motion all-wheel-drive variant

The VW Crafter has been Volkswagen's heavy van range since 2006, based on the platform of the second-generation Mercedes-Benz Sprinter; Daimler built the first Crafter generation as a technical sister model of the Sprinter for Volkswagen at the Mercedes-Benz plants in Düsseldorf and Ludwigsfelde. 4Motion denotes the all-wheel-drive variant, TDI the turbocharged diesel engines, and LM-350N-2.5TDI-2EKE2 the wheelbase, engine and equipment combination of a panel van.

Read on 3 more paragraphs

The register lists 6 versions with 65 to 130 kW, TDI four-cylinder engines from 1,968 to 2,461 cc, kerb weights of 2,310 to 2,945.5 kg, a consistent 3,500 kg gross vehicle weight, lengths of 5,910 to 7,035 mm and widths of 1,993 to 2,200 mm.

With the shared-platform strategy, Volkswagen was able to enter the heavy-van segment without developing its own vehicle; the Crafter, as a near-identical technical twin, competed directly with the Sprinter and, thanks to VW's dense dealer network, was especially popular with fleet and rental customers.

When buying used, as with the Sprinter, check for rust at the sliding door rails, load sill and underbody, the condition of the timing belt or timing chain depending on the engine variant, and the function of the automatic gearbox, plus on 4Motion models the condition of the all-wheel-drive transfer coupling; since the underlying technology is identical to the Sprinter's, parts are available through both brand networks.

Sources: SpecCodex register, model data: Volkswagen Crafter, Volkswagen Nutzfahrzeuge (manufacturer)

Technical data

Engine

Power130 kWcorrect
Cylinders4correct
Displacement1,968 cm³correct

Dimensions and weights

Length7,035 mmcorrect
Width2,200 mmcorrect
Unladen weight2,726 kgcorrect
Gross vehicle weight3,500 kgcorrect

Where this model stands

Power-to-weight ratio: 47.7 kW/t (130 kW / 2.7 t)

Stronger than 89% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Volkswagen Vw VW CRAFTER AUT have?

The Volkswagen Vw VW CRAFTER AUT delivers 130 kW.

How much does the Volkswagen Vw VW CRAFTER AUT weigh?

The unladen weight is 2,726 kg.

What is the gross vehicle weight of the Volkswagen Vw VW CRAFTER AUT?

3,500 kg.

What engine does the Volkswagen Vw VW CRAFTER AUT have?

4 cylinders, 1,968 cm³ displacement.

What are the dimensions of the Volkswagen Vw VW CRAFTER AUT?

7,035 mm × 2,200 mm.

When was the Volkswagen Vw VW CRAFTER AUT built?

Production years: 2018.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare