Technical register for agricultural, construction and commercial machinery · sourced data
StartTractorsValmet › 6250-4-4X4/233

Valmet 6250-4-4X4/233

Built: 2000–2002 · Series: Other models

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Valmet builds this tractor. According to the available register data, the recorded vehicles date from 2000 to 2002. Dimensions: 2,491.5 mm long and 2,160 mm wide. Its kerb weight comes to 4,650 kg. Fully loaded, it may not exceed 9,000 kg. The engine delivers 59 kW, has 4 cylinders, with a displacement of 4,390 cm³. According to the Finnish vehicle register, 2 examples of this model are on record. The EU type-approval number for this model is e17*0016*02(74/150*97/54).

Valmet – other models: the collective page of Finnish tractors outside the named ranges, from the Valmet 20 through the 300 to 700 types to the Mezzo range 6100 to 6850, 11 to 120 kW

This page gathers the Valmet tractors the register could not assign to a named range – from the first tractor designed in Finland to the Mezzo models of the 1980s and 1990s. Valmet emerged from the state-owned Finnish engineering combine Valtion Metallitehtaat and built its own tractors from 1951, starting with the Valmet 15 and the Valmet 20 presented in 1956. The type logic changed over the decades: the three-digit types of the 1960s and 1970s such as 305, 359, 455, 505, 605 and 700 order the power class in ascending order, the suffix -4 and -4X4 marks four-wheel-drive models, the number after the slash an internal equipment or transmission code; the 6000 range (Mezzo) of the 1980s and 1990s from 6100 to 6850 replaced the older ranges. In 1997 the brand passed to Valtra after the sale to the engine maker Sisu.

Read on 3 more paragraphs

The register lists here 112 versions with 11 to 120 kW from three- to six-cylinders of 1,400 to 7,400 cm³, unladen weights from 780 to 6,640 kg, gross weights from 1,250 to 13,000 kg, lengths from about 2,490 to 5,250 mm and widths from 1,430 to 2,640 mm.

Valmet was one of the leading brands in Finland and Scandinavia for decades and shaped the Nordic farm-machinery market with cold-resistant engineering – sturdy cab heating, cold-start-capable diesel engines, sealed drivetrains; part of the output was exported to the former Soviet Union and to Eastern Europe, where the simple technology and parts supply were valued.

On used tractors, rust on panels and cab, clutch and synchro gearbox, hydraulic pump and PTO count on the older ranges, and electronics, cab mounting and engine condition on the Mezzo models of the 6000 range; parts for most model years now run through the Valtra network, which has continued the brand since the 1997 renaming.

Sources: Kennwerte der Modelle Valmet (weitere Modelle), Valtra (Rechtsnachfolger von Valmet)

Technical data

Engine

Power59 kWcorrect
Cylinders4correct
Displacement4,390 cm³correct

Dimensions and weights

Length2,491.5 mmcorrect
Width2,160 mmcorrect
Unladen weight4,650 kgcorrect
Gross vehicle weight9,000 kgcorrect

Where this model stands

Power-to-weight ratio: 12.7 kW/t (59 kW / 4.7 t)

Power class: Universal (40–100 hp)

Stronger than 55% of the tractors in the register — out of 15,659 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Valmet 6250-4-4X4/233 have?

The Valmet 6250-4-4X4/233 delivers 59 kW.

How much does the Valmet 6250-4-4X4/233 weigh?

The unladen weight is 4,650 kg.

What is the gross vehicle weight of the Valmet 6250-4-4X4/233?

9,000 kg.

What engine does the Valmet 6250-4-4X4/233 have?

4 cylinders, 4,390 cm³ displacement.

What are the dimensions of the Valmet 6250-4-4X4/233?

2,492 mm × 2,160 mm.

When was the Valmet 6250-4-4X4/233 built?

Production years: 2000–2002.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Load the hydraulics and watch for sag.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Tractor in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare