TYSSE HeatWork HW3600
Built: 2010–2021 · Series: Other models
More machines from model year 2010
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Tysse – other models: Norwegian trailers with heating units (HeatWork, HydroHeater) up to 3.5 t outside the named ranges, unladen weights 310 to 2,100 kg
This page gathers the trailers of the Norwegian brand Tysse the register could not assign to a named range. Part of the line-up carries the model designations HeatWork and HydroHeater and is fitted with mobile heating and drying units, used for thawing ground and heating building sites; the number in types such as HW 3600 gives the heating output. The trailers fall into EU class O2, trailers from 0.75 to 3.5 t gross weight.
Read on 3 more paragraphs
The register lists here 12 versions with unladen weights from 310 to 2,100 kg, gross weights from 1,150 to 2,400 kg, lengths from 3,300 to 4,850 mm and widths from 1,580 to 1,980 mm.
Mobile heating units on a trailer chassis are common in Scandinavian winter construction, where they protect excavations, concrete surfaces or pipelines from frost or thaw them out; the mobility allows a quick change between building sites without a stationary installation.
When buying used, alongside the chassis, axle and braking system, attention should go above all to the condition and tightness of the burner, heat exchanger and lines of the heating unit and its servicing history; spare parts for the chassis are independent of make, those for the heating technology available through the equipment maker.
Technical data
Dimensions and weights
| Length | 4,483 mmcorrect |
|---|---|
| Width | 1,950 mmcorrect |
| Unladen weight | 2,100 kgcorrect |
| Gross vehicle weight | 2,100 kgcorrect |
Frequently asked questions
How much does the TYSSE HeatWork HW3600 weigh?
The unladen weight is 2,100 kg.
What is the gross vehicle weight of the TYSSE HeatWork HW3600?
2,100 kg.
What are the dimensions of the TYSSE HeatWork HW3600?
4,483 mm × 1,950 mm.
When was the TYSSE HeatWork HW3600 built?
Production years: 2010–2021.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
6208
6311001-2.17M/483
HW3600
HeatWork HW 1800
HeatWork HW 3600
HeatWork HW 700
HeatWork HW1800
HeatWork MY35
HydroHeater HW 3600
YYB6207B
YYB6220B
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.