Tabbert 530C
Built: 1974 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 6,450 mmcorrect |
|---|---|
| Width | 2,160 mmcorrect |
| Unladen weight | 945 kgcorrect |
| Gross vehicle weight | 1,155 kgcorrect |
Frequently asked questions
How much does the Tabbert 530C weigh?
The unladen weight is 945 kg.
What is the gross vehicle weight of the Tabbert 530C?
1,155 kg.
What are the dimensions of the Tabbert 530C?
6,450 mm × 2,160 mm.
When was the Tabbert 530C built?
Production years: 1974.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
460TL
490 Exzellenz II
531/1
540 Contesse
540B
545 TE COMTESSE
600 Baronese
620 MDQ
640
655 MDW Baroness
660 COMTESSE/455+66
685 DELUXE
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.