Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Peugeot › Partner Van Hdi90 L2

Peugeot Partner Van Hdi90 L2

Built: 2009–2011 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 2009

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Partner Van Hdi90 L2 by Peugeot belongs to the category Vans up to 3.5 t (Class N1). According to the available register data, the recorded vehicles date from 2009 to 2011. Dimensions: 4,628 mm long and 1,810 mm wide. The unladen weight is 1,476 kg. The permitted gross weight is 2,150 kg. The engine delivers 66.2 kW, has 4 cylinders, with a displacement of 1,560 cm³. According to the Finnish vehicle register, 49 examples of this model are on record. The gearbox has 5 gears. The EU type-approval number for this model is FIN*071207*00038*00.

Peugeot vans and utility versions up to 3.5 t (class N1) – collective page for the EU light-van class: from the 203/205 commercial versions of the 1950s to Boxer, Expert and Partner, engines from 34 to 121 kW, gross weights up to 3.5 t

The EU vehicle class N1 covers light commercial vehicles up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Peugeot range recorded in that class. Peugeot, founded in 1810 as a family business and building cars since 1889, is among the longest-established European van makers, part of PSA since the Citroën merger (1976) and of Stellantis since 2021. The register holds early commercial versions of the 203 and 205 saloon ranges (COMMERCIAL trims with an estate-style rear) alongside the actual van ranges, which by manufacturer logic fall into J7/J9 (forward-control vans until 1991), Boxer (since 1994, jointly developed with the Fiat Ducato and Citroën Jumper), Expert (since 1995, with the Fiat Scudo/Citroën Jumpy) and Partner (since 1996) – the newer ranges are grouped here by manufacturer logic.

Read on 3 more paragraphs

The register lists 990 versions, with recorded outputs of 34 to 121 kW, displacements of 695 to 2,999 cm³ across 4 to 6 cylinders, kerb weights of 500 to 3,360 kg and gross vehicle weights of 824 to 3,500 kg; width ranges from 1,280 to 2,440 mm, length from 3,520 to 7,400 mm.

As a class, N1 covers everything at Peugeot from a small estate car with a commercial registration to a large-volume panel van used below 3.5 t for trade purposes – direct competitors are the sister models from Citroën/Fiat as well as Renault, VW and Ford.

On a used example, what matters on the older ranges is corrosion around the wheel arches and load floor, on the newer common-rail diesels the turbocharger, EGR valve and particulate filter, plus the condition of the sliding door runners and the payload on the registration document against the gross vehicle weight. Parts are generally well supplied through the dense Stellantis dealer network.

Sources: Kennwerte der Modelle Peugeot Transporter bis 3,5 t (Klasse N1), Peugeot (Stellantis, Hersteller)

Technical data

Engine

Power66.2 kWcorrect
Cylinders4correct
Displacement1,560 cm³correct

Dimensions and weights

Length4,628 mmcorrect
Width1,810 mmcorrect
Unladen weight1,476 kgcorrect
Gross vehicle weight2,150 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 44.9 kW/t (66 kW / 1.5 t)

Stronger than 28% of the vans in the register — out of 7,145 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Peugeot Partner Van Hdi90 L2 have?

The Peugeot Partner Van Hdi90 L2 delivers 66.2 kW.

How much does the Peugeot Partner Van Hdi90 L2 weigh?

The unladen weight is 1,476 kg.

What is the gross vehicle weight of the Peugeot Partner Van Hdi90 L2?

2,150 kg.

What engine does the Peugeot Partner Van Hdi90 L2 have?

4 cylinders, 1,560 cm³ displacement.

What are the dimensions of the Peugeot Partner Van Hdi90 L2?

4,628 mm × 1,810 mm.

When was the Peugeot Partner Van Hdi90 L2 built?

Production years: 2009–2011.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare