Palax COMBI II
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Palax – other models: the collective page of firewood machinery from Ylistaro on a trailer chassis up to 750 kg outside the named ranges, from the HH 100 to the Combi 600 TSV E, 250 to 750 kg unladen weight
This page gathers the Palax versions the register could not assign to a named range. Palax of Ylistaro, Finland, does not build ordinary trailers but firewood machinery permanently mounted on a trailer chassis: the Combi range combines a swing-blade circular saw and a log splitter in one operation, the HH models and the Logsplit range are pure log splitters, and the Mobil suffix consistently marks the towable version on its own axle as opposed to the stationary variant. TSV E denotes a particular drive and feed specification on the Combi models.
Read on 3 more paragraphs
The register lists 18 versions with unladen weights from 250 to 750 kg, gross weights from 440 to 750 kg, lengths from 3,050 to 4,550 mm and widths from 1,590 to 1,960 mm.
The narrow span between unladen weight and gross weight shows the character of these units: unlike ordinary trailers, the payload is not meant for changing cargo, but the weight of the permanently mounted machine itself makes up most of the trailer's load; Palax ranks among the well-known Finnish firewood-technology brands and supplies other European countries alongside its home market.
On a used purchase of these units, the trailer components matter less than the condition of the saw or splitting wedge, hydraulics, conveyor and drive, plus axle, brakes where fitted, the overrun brake unit and lighting; spare parts for the machine technology run through Palax itself and its distribution network.
Sources: Kennwerte der Modelle Palax (weitere Modelle), Palax (Hersteller)
Technical data
Dimensions and weights
| Length | 3,670 mmcorrect |
|---|---|
| Width | 1,950 mmcorrect |
| Unladen weight | 710 kgcorrect |
Frequently asked questions
How much does the Palax COMBI II weigh?
The unladen weight is 710 kg.
What are the dimensions of the Palax COMBI II?
3,670 mm × 1,950 mm.
When was the Palax COMBI II built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
600 COMBI
600 Combi Mobil
600 compi
Active Mobil
COMBI TSV E
Combi 600 TSV E
Combi M
HH 100
HH100
LOGSPLIT 60
Logsplit 100
Logsplit 100 Mobil
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.