StartTrucks over 7.5 tMercedes Benz › Sprinter 415CDI

Mercedes Benz Sprinter 415CDI

Built: 2008 · Series: Trucks 3.5–12 t (Class N2)

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

Sprinter 415CDI from Mercedes Benz falls into the category Trucks 3.5–12 t (Class N2). According to the available register data, the vehicle dates from 2008. The truck is 6,755 mm long and 1,991.5 mm wide. Its kerb weight comes to 2,720 kg. The permitted gross weight is 4,600 kg. The engine delivers 110 kW, has 4 cylinders, with a displacement of 2,145.5 cm³. The Finnish vehicle register lists 2 examples of this model. The gearbox has 6 gears. The EU type-approval number for this model is L845*03.

The Düsseldorfer — Mercedes T2 and what the numbers mean

Anyone looking for a 508 D or 608 D is looking for the T2 — called "Düdo" by drivers and collectors, after the Düsseldorf plant where it was built from 1967 to 1991. The series ran until 1996, making it one of the longest-produced commercial vehicles in its class.

Read on 4 more paragraphs

The type designation is arithmetic: the first digit gives the permissible gross weight in tonnes, the following ones the engine output in metric horsepower. A 508 D is rated at 5 tonnes and around 80 hp, a 608 D with the same engine at 6 tonnes. The "D" stands for diesel. Technically, then, less separates them than the numbers suggest — the 608 D is essentially a more highly rated 508 D.

Under the bonnet of most of these vehicles sits the OM 314: a four-cylinder inline engine of 3,758 cc with direct injection, rated at 80 or 85 hp depending on version. It was the most popular choice in the first T2 generation and also appears in the O 309 bus. Anyone hunting for parts still benefits: an engine used across several series stays supplied longer than a one-off.

In 1986 an entirely new second generation arrived, built until 1996 and delivered mainly with diesel engines. When buying used it is therefore worth checking the year: a complete redesign lies between the first and second generation, even though both go by T2.

Register entries in this class come largely from official registration data. They are reliable on dimensions and weights — equipment details of individual vehicles are, by their nature, not recorded there.

Sources: Wikipedia: Mercedes-Benz T2, Wikipedia (englisch), Car-Chief: OM 314

Technical data

Engine

Power110 kWcorrect
Cylinders4correct
Displacement2,145.5 cm³correct

Dimensions and weights

Length6,755 mmcorrect
Width1,991.5 mmcorrect
Unladen weight2,720 kgcorrect
Gross vehicle weight4,600 kgcorrect

Drivetrain and chassis

Gears6correct

Where this model stands

Power-to-weight ratio: 40.4 kW/t (110 kW / 2.7 t)

Stronger than 10% of the trucks over 7.5 t in the register — out of 27,776 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz Sprinter 415CDI have?

The Mercedes Benz Sprinter 415CDI delivers 110 kW.

How much does the Mercedes Benz Sprinter 415CDI weigh?

The unladen weight is 2,720 kg.

What is the gross vehicle weight of the Mercedes Benz Sprinter 415CDI?

4,600 kg.

What engine does the Mercedes Benz Sprinter 415CDI have?

4 cylinders, 2,146 cm³ displacement.

What are the dimensions of the Mercedes Benz Sprinter 415CDI?

6,755 mm × 1,992 mm.

When was the Mercedes Benz Sprinter 415CDI built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 10 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare