Mercedes Benz Spinter 315 CDi-3.55
Built: 2008 · Series: SPINTER
More machines from model year 2008
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Mercedes-Benz Spinter: light van and panel-van series with common-rail CDI diesel engines from 70 to 135 kW, displacement from 2.1 to 3.0 litres, gross weights up to 3.88 tonnes, type codes from 311CDI to 318CDI
This page gathers the light Mercedes-Benz vans listed in the register under the name Spinter with common-rail CDI diesel engines, from the 311CDI to the 318CDI and the panel-van 31310CDI Prostyle. As with other light Mercedes vans, the number before CDI refers to the weight class and power step, while CDI denotes the common-rail direct-injection diesel.
Read on 3 more paragraphs
The register lists here 8 versions with four- and six-cylinder CDI engines of 70 to 135 kW and 2,140 to 2,987 cc, kerb weights from 1,750 to 3,100 kg, gross weights from 3,550 to 3,880 kg, lengths from 5,910 to 7,350 mm and widths from 1,930 to 1,993 mm.
This series is among the most widely used light commercial vehicles in Europe, as a panel van for parcel and courier services, as a base for minibuses and motorhomes, and as a tradesman's workshop vehicle; it competes directly with the VW Crafter, Iveco Daily and Ford Transit, and its wide spread of wheelbases and roof heights offers a suitable body variant for almost any commercial purpose.
When buying used, check the sills and rear doors for rust, the condition of the turbocharger and injection system on the common-rail diesels, timing-chain wear at high mileages, and brakes and suspension given the high gross weights; parts run through the dense Mercedes-Benz van service network, which also supplies original parts to independent workshops.
Sources: SpecCodex register, model data: Mercedes-Benz Spinter, Mercedes-Benz (manufacturer)
Technical data
Engine
| Power | 110 kWcorrect |
|---|---|
| Cylinders | 4correct |
| Displacement | 2,140 cm³correct |
Dimensions and weights
| Length | 5,920 mmcorrect |
|---|---|
| Width | 1,990 mmcorrect |
| Unladen weight | 2,680 kgcorrect |
| Gross vehicle weight | 3,550 kgcorrect |
Where this model stands
Power-to-weight ratio: 41 kW/t (110 kW / 2.7 t)
Stronger than 8% of the trucks in the register — out of 25,242 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Mercedes Benz Spinter 315 CDi-3.55 have?
The Mercedes Benz Spinter 315 CDi-3.55 delivers 110 kW.
How much does the Mercedes Benz Spinter 315 CDi-3.55 weigh?
The unladen weight is 2,680 kg.
What is the gross vehicle weight of the Mercedes Benz Spinter 315 CDi-3.55?
3,550 kg.
What engine does the Mercedes Benz Spinter 315 CDi-3.55 have?
4 cylinders, 2,140 cm³ displacement.
What are the dimensions of the Mercedes Benz Spinter 315 CDi-3.55?
5,920 mm × 1,990 mm.
When was the Mercedes Benz Spinter 315 CDi-3.55 built?
Production years: 2008.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
SPINTER 311CDI
SPINTER 313CDI
SPINTER 315 CDI
SPINTER 318CDI
SPINTER KASTEN 31310CDI PROSTYLE
Spinter
Spinter 316CDI 906 KA 35
Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data
Truck in 3D section
Turn the model, look inside and click an assembly — each one is explained.
