Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Other models › LK1513

Mercedes Benz LK1513

Built: 1972 · Series: Other models

More machines from model year 1972

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The LK1513 comes from Mercedes Benz. Production: 1972. The engine delivers 141 kW, with a displacement of 5,670 cm³. The vehicle is 6,850 mm long and 2,500 mm wide. The unladen weight is 6,000 kg. Rated output across the Mercedes Benz range ranges from 17.7 to 460 kW; the LK1513 sits in the lower part of that range with 141 kW. Its immediate neighbours are the X below it with 140 kW and the GLE 350 de 4MATIC above it with 143 kW. Unladen weight across the Mercedes Benz range ranges from 1,095 to 61,500 kg; here the LK1513 sits at the bottom of that range with 6,000 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz – other models: the collective page of trucks over 7.5 tonnes outside the named ranges, from short-bonnet cabs to Atego, type logic from weight class and horsepower, 48 to 335 kW

This page gathers Mercedes-Benz trucks over 7.5 tonnes that the register could not assign to its own range page – from classic short-bonnet cabs of the 1970s to Atego chassis of the 2000s. Mercedes-Benz Trucks has built its trucks for decades in Wörth am Rhein and, alongside MAN, Volvo and Scania, ranks among the major European manufacturers. The classic type designation follows a fixed pattern: the first two to three digits give the permissible gross weight in tonnes, the following two digits the engine output in hp divided by ten – a 1622 is, as a rule, a 16-tonner with about 220 hp, a 2635 a 26-tonner with about 350 hp. The suffixes AK, K and NT denote four-wheel-drive or construction-site versions, the combinations 4X2, 4X4, 6X2, 6X4 and 8X2/8X4 the axle configuration, and the Atego suffix from 1998 the mid-range.

Read on 3 more paragraphs

The register lists here 163 versions with 48 to 335 kW from four- to eight-cylinders of 1,900 to 18,270 cm³, unladen weights from 2,020 to 30,500 kg, lengths up to 11,600 mm and widths up to 2,800 mm.

Alongside Volvo, Scania, MAN and DAF, Mercedes-Benz is one of Europe's leading truck makers; in this segment the vehicles range from the mid-size distribution truck to the heavy tractor unit and tipper chassis for construction and long-haul transport.

When buying used, on the older short-bonnet trucks what counts is rust on the frame and leaf springs and the availability of parts for the mechanical injection; on the newer Atego and NT ranges, the condition of clutch and gearbox, the braking system (ABS/EBS), and the turbocharger and intercooler. Also important are complete inspection records, the condition of axles and suspension depending on use (long-haul, construction, municipal) and a working tail lift or tipper mechanism where fitted.

Sources: SpecCodex register, model data: Mercedes-Benz (weitere Modelle), Mercedes-Benz Trucks (manufacturer)

Technical data

Engine

Power141 kWcorrect
Displacement5,670 cm³correct

Dimensions and weights

Length6,850 mmcorrect
Width2,500 mmcorrect
Unladen weight6,000 kgcorrect

Where this model stands

Power-to-weight ratio: 23.5 kW/t (141 kW / 6 t)

Stronger than 18% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz LK1513 have?

The Mercedes Benz LK1513 delivers 141 kW.

How much does the Mercedes Benz LK1513 weigh?

The unladen weight is 6,000 kg.

What engine does the Mercedes Benz LK1513 have?

5,670 cm³ displacement.

What are the dimensions of the Mercedes Benz LK1513?

6,850 mm × 2,500 mm.

When was the Mercedes Benz LK1513 built?

Production years: 1972.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare