Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Trucks 3.5–12 t (Class N2) › LF1113B/ PALOAUTO

Mercedes Benz LF1113B/ PALOAUTO

Built: 1975 · Series: Trucks 3.5–12 t (Class N2)

More machines from model year 1975

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz LF1113B/ PALOAUTO is a model in the Trucks 3.5–12 t (Class N2) series. Production: 1975. The engine has 6 cylinders, with a displacement of 5,670 cm³. The vehicle is 8,090 mm long and 2,420 mm wide. The unladen weight is 5,950 kg. The gross vehicle weight is 9,000 kg. The Trucks 3.5–12 t (Class N2) series covers 1532 models. Unladen weight within it ranges from 1,660 to 41,500 kg; the LF1113B/ PALOAUTO sits at the bottom of that range with 5,950 kg. Its immediate neighbours are the 815L below it with 5,925 kg and the E 914 above it with 5,960 kg. Gross vehicle weight within it ranges from 3,505 to 12,000 kg; here the LF1113B/ PALOAUTO sits in the upper part of that range with 9,000 kg. 8330 Mercedes Benz models across 126 series are on record.

The Düsseldorfer – Mercedes T2 and what the numbers mean: range 508 D to 813 D, four-cylinder OM 314 diesel, collective page of the N2 truck class from 3.5 to 12 tonnes

Anyone looking for a 508 D or 608 D is looking for the T2 — called "Düdo" by drivers and collectors, after the Düsseldorf plant where it was built from 1967 to 1991. The series ran until 1996, making it one of the longest-produced commercial vehicles in its class.

Read on 4 more paragraphs

The type designation is arithmetic: the first digit gives the permissible gross weight in tonnes, the following ones the engine output in metric horsepower. A 508 D is rated at 5 tonnes and around 80 hp, a 608 D with the same engine at 6 tonnes. The "D" stands for diesel. Technically, then, less separates them than the numbers suggest — the 608 D is essentially a more highly rated 508 D.

Under the bonnet of most of these vehicles sits the OM 314: a four-cylinder inline engine of 3,758 cc with direct injection, rated at 80 or 85 hp depending on version. It was the most popular choice in the first T2 generation and also appears in the O 309 bus. Anyone hunting for parts still benefits: an engine used across several series stays supplied longer than a one-off.

In 1986 an entirely new second generation arrived, built until 1996 and delivered mainly with diesel engines. When buying used it is therefore worth checking the year: a complete redesign lies between the first and second generation, even though both go by T2.

Register entries in this class come largely from official registration data. They are reliable on dimensions and weights — equipment details of individual vehicles are naturally not part of it.

Sources: SpecCodex register, model data: Mercedes-Benz Lkw 3,5–12 t (Klasse N2), Mercedes-Benz Trucks

Technical data

Engine

Cylinders6correct
Displacement5,670 cm³correct

Dimensions and weights

Length8,090 mmcorrect
Width2,420 mmcorrect
Unladen weight5,950 kgcorrect
Gross vehicle weight9,000 kgcorrect

Frequently asked questions

How much does the Mercedes Benz LF1113B/ PALOAUTO weigh?

The unladen weight is 5,950 kg.

What is the gross vehicle weight of the Mercedes Benz LF1113B/ PALOAUTO?

9,000 kg.

What engine does the Mercedes Benz LF1113B/ PALOAUTO have?

6 cylinders, 5,670 cm³ displacement.

What are the dimensions of the Mercedes Benz LF1113B/ PALOAUTO?

8,090 mm × 2,420 mm.

When was the Mercedes Benz LF1113B/ PALOAUTO built?

Production years: 1975.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare