Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Other models › L-1113

Mercedes Benz L-1113

Built: 1967 · Series: Other models

More machines from model year 1967

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The L-1113 comes from Mercedes Benz. Production: 1967. The engine delivers 129 kW, with a displacement of 5,672 cm³. The vehicle is 7,510 mm long and 2,470 mm wide. The unladen weight is 4,600 kg. The gearbox offers 5 gears. Rated output across the Mercedes Benz range ranges from 17.7 to 460 kW; the L-1113 sits in the lower part of that range with 129 kW. Its immediate neighbours are the VAN 300 TD-AUTOMATIC-124190 below it with 128.9 kW and the 10(17,18)L-97024/362 above it with 130 kW. Unladen weight across the Mercedes Benz range ranges from 1,095 to 61,500 kg; here the L-1113 sits at the bottom of that range with 4,600 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz – other models: the collective page of trucks over 7.5 tonnes outside the named ranges, from short-bonnet cabs to Atego, type logic from weight class and horsepower, 48 to 335 kW

This page gathers Mercedes-Benz trucks over 7.5 tonnes that the register could not assign to its own range page – from classic short-bonnet cabs of the 1970s to Atego chassis of the 2000s. Mercedes-Benz Trucks has built its trucks for decades in Wörth am Rhein and, alongside MAN, Volvo and Scania, ranks among the major European manufacturers. The classic type designation follows a fixed pattern: the first two to three digits give the permissible gross weight in tonnes, the following two digits the engine output in hp divided by ten – a 1622 is, as a rule, a 16-tonner with about 220 hp, a 2635 a 26-tonner with about 350 hp. The suffixes AK, K and NT denote four-wheel-drive or construction-site versions, the combinations 4X2, 4X4, 6X2, 6X4 and 8X2/8X4 the axle configuration, and the Atego suffix from 1998 the mid-range.

Read on 3 more paragraphs

The register lists here 163 versions with 48 to 335 kW from four- to eight-cylinders of 1,900 to 18,270 cm³, unladen weights from 2,020 to 30,500 kg, lengths up to 11,600 mm and widths up to 2,800 mm.

Alongside Volvo, Scania, MAN and DAF, Mercedes-Benz is one of Europe's leading truck makers; in this segment the vehicles range from the mid-size distribution truck to the heavy tractor unit and tipper chassis for construction and long-haul transport.

When buying used, on the older short-bonnet trucks what counts is rust on the frame and leaf springs and the availability of parts for the mechanical injection; on the newer Atego and NT ranges, the condition of clutch and gearbox, the braking system (ABS/EBS), and the turbocharger and intercooler. Also important are complete inspection records, the condition of axles and suspension depending on use (long-haul, construction, municipal) and a working tail lift or tipper mechanism where fitted.

Sources: SpecCodex register, model data: Mercedes-Benz (weitere Modelle), Mercedes-Benz Trucks (manufacturer)

Technical data

Engine

Power129 kWcorrect
Displacement5,672 cm³correct

Dimensions and weights

Length7,510 mmcorrect
Width2,470 mmcorrect
Unladen weight4,600 kgcorrect

Drivetrain and chassis

Gears5correct

Where this model stands

Power-to-weight ratio: 28 kW/t (129 kW / 4.6 t)

Stronger than 13% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz L-1113 have?

The Mercedes Benz L-1113 delivers 129 kW.

How much does the Mercedes Benz L-1113 weigh?

The unladen weight is 4,600 kg.

What engine does the Mercedes Benz L-1113 have?

5,672 cm³ displacement.

What are the dimensions of the Mercedes Benz L-1113?

7,510 mm × 2,470 mm.

When was the Mercedes Benz L-1113 built?

Production years: 1967.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare