Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › ECONIC › ECONIC 2635L

Mercedes Benz ECONIC 2635L

Built: 2015 · Series: ECONIC

More machines from model year 2015

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz ECONIC 2635L belongs to the ECONIC series. Production: 2015. The engine delivers 260 kW, with a displacement of 7,698 cm³. The vehicle is 10,250 mm long and 2,550 mm wide. The unladen weight is 16,750 kg. The gross vehicle weight is 27,000 kg. The ECONIC series covers 25 models. Rated output within it ranges from 175 to 260 kW; the ECONIC 2635L sits at the top of that range with 260 kW. Its immediate neighbours are the ECONIC 2633 L/NLA6X2/4 3900 below it with 242 kW. Unladen weight within it ranges from 9,600 to 25,560 kg; here the ECONIC 2635L sits in the middle of that range with 16,750 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Econic – low-entry chassis for refuse collection and distribution work since 1998, also as the NGT natural-gas variant: inline six-cylinders from 175 to 260 kW, 6,370 to 7,698 cc, gross weights up to 27

The Econic is Mercedes-Benz's low-entry chassis for municipal and inner-city work, built since 1998 at the Wörth am Rhein plant. Unlike a conventional truck chassis, the driver sits low between the axles behind large glazing with an almost direct view of the road, a layout meant to improve visibility of pedestrians and cyclists during refuse collection and distribution runs. The type designations in the register show the axle configuration, such as 6X2/4 for a second, steered trailing axle, and the NGT suffix for the natural-gas-powered variant offered alongside the diesel.

Read on 3 more paragraphs

The register lists here 25 versions with 175 to 260 kW from inline six-cylinders of 6,370 to 7,698 cc, unladen weights from 7,230 to 25,560 kg, gross vehicle weights from 18,000 to 27,160 kg, lengths from 6,130 to 11,390 mm and widths from 2,420 to 2,600 mm.

As a low-entry specialist the Econic competes in the refuse segment with similar chassis from DAF, Volvo and MAN; its advantage lies in the low step-in and direct sightlines, which save time during the frequent stops of refuse rounds and cut risk to unprotected road users. Bodies range from compactor refuse collectors and sweepers to distribution box bodies and tail lifts.

Buying a used Econic, what matters is the condition of the particular body and its hydraulics, brake and running-gear wear from stop-start duty, and on NGT variants the condition of the gas tanks and their inspection intervals. Parts run through the Mercedes-Benz commercial vehicle dealer network, supplemented for older years by independent truck workshops.

Sources: SpecCodex register, model data: Mercedes-Benz ECONIC, Mercedes-Benz (manufacturer)

Technical data

Engine

Power260 kWcorrect
Displacement7,698 cm³correct

Dimensions and weights

Length10,250 mmcorrect
Width2,550 mmcorrect
Unladen weight16,750 kgcorrect
Gross vehicle weight27,000 kgcorrect

Where this model stands

Power-to-weight ratio: 15.5 kW/t (260 kW / 16.8 t)

Stronger than 43% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz ECONIC 2635L have?

The Mercedes Benz ECONIC 2635L delivers 260 kW.

How much does the Mercedes Benz ECONIC 2635L weigh?

The unladen weight is 16,750 kg.

What is the gross vehicle weight of the Mercedes Benz ECONIC 2635L?

27,000 kg.

What engine does the Mercedes Benz ECONIC 2635L have?

7,698 cm³ displacement.

What are the dimensions of the Mercedes Benz ECONIC 2635L?

10,250 mm × 2,550 mm.

When was the Mercedes Benz ECONIC 2635L built?

Production years: 2015.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare