Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Axor › AXOR C 1840LS

Mercedes Benz AXOR C 1840LS

Built: 2008 · Series: Axor

More machines from model year 2008

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Axor series from Mercedes Benz includes the AXOR C 1840LS. Production: 2008. The engine delivers 295 kW, has 6 cylinders, with a displacement of 11,970 cm³. The vehicle is 5,820 mm long and 2,490 mm wide. The unladen weight is 6,972.5 kg. The gross vehicle weight is 18,000 kg. The Axor series covers 94 models. Rated output within it ranges from 170 to 315 kW; the AXOR C 1840LS sits at the top of that range with 295 kW. Its immediate neighbours are the 18,40LS-94403/360 below it with 294 kW and the AXOR 2543 above it with 315 kW. Unladen weight within it ranges from 6,725 to 18,300 kg; here the AXOR C 1840LS sits at the bottom of that range with 6,972.5 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes-Benz Axor – the mid-range between Atego and Actros, 2001 to 2013: OM906/OM457 inline engines of 170 to 315 kW, 4x2 to 8x4 chassis, distribution and construction-site haulage

The Axor replaced Mercedes-Benz's previous mid-range in 2001, positioned between the lighter Atego and the heavy long-haul Actros; production ended in 2013 with the introduction of the new Actros generation, which has since covered the mid weight classes as well. The four-digit type designation follows the Mercedes scheme: the first two digits give the gross weight in hundreds of kilograms (18 for 18 tonnes, 25 for 25 tonnes, 32 for 32 tonnes), the following two the power class, L stands for the long-haul cab, K for the construction version, and the axle formula (4x2, 6x2, 6x4, 8x4) for drive and axle count.

Read on 3 more paragraphs

The register lists 94 versions here with engines from 170 to 315 kW from 6,370 to 11,970 cm³ displacement with 6 cylinders, kerb weights from 6,725 to 19,490 kg, gross weights from 18,000 to 35,000 kg, lengths from 5,780 to 11,900 mm and widths from 2,450 to 2,600 mm.

The Axor was widespread as a distribution truck, tipper and construction vehicle and formed the backbone of Mercedes' mid-range truck programme for well over a decade, before the Actros family took over the mid weight classes.

On used OM906/OM457 inline engines, what counts is the turbocharger, injection pump and cooling system, the condition of the clutch and gearbox, frame and cab rust, and on tipper and construction versions the hydraulics and underrun protection; spare parts are widely available through the Mercedes network and independent commercial-vehicle workshops.

Sources: SpecCodex register, model data: Mercedes-Benz Axor, Mercedes-Benz Trucks (manufacturer)

Technical data

Engine

Power295 kWcorrect
Cylinders6correct
Displacement11,970 cm³correct

Dimensions and weights

Length5,820 mmcorrect
Width2,490 mmcorrect
Unladen weight6,972.5 kgcorrect
Gross vehicle weight18,000 kgcorrect

Where this model stands

Power-to-weight ratio: 42.3 kW/t (295 kW / 7 t)

Stronger than 53% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz AXOR C 1840LS have?

The Mercedes Benz AXOR C 1840LS delivers 295 kW.

How much does the Mercedes Benz AXOR C 1840LS weigh?

The unladen weight is 6,972 kg.

What is the gross vehicle weight of the Mercedes Benz AXOR C 1840LS?

18,000 kg.

What engine does the Mercedes Benz AXOR C 1840LS have?

6 cylinders, 11,970 cm³ displacement.

What are the dimensions of the Mercedes Benz AXOR C 1840LS?

5,820 mm × 2,490 mm.

When was the Mercedes Benz AXOR C 1840LS built?

Production years: 2008.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 8 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare