Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trucks › Mercedes Benz › Actros › ACTROS 2642

Mercedes Benz ACTROS 2642

Built: 2014 · Series: Actros

More machines from model year 2014

Source: truck1.eu

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The Mercedes Benz ACTROS 2642 belongs to the Actros series. Production: 2014. The engine delivers 300 kW, has 6 cylinders, with a displacement of 11,946 cm³. The vehicle is 11,420 mm long and 2,500 mm wide. The unladen weight is 25,700 kg. The gross vehicle weight is 27,500 kg. The gearbox offers 8 gears. The Actros series covers 554 models. Rated output within it ranges from 130 to 460 kW; the ACTROS 2642 sits in the middle of that range with 300 kW. Its immediate neighbours are the 2540L below it with 290 kW and the Actros 1842 above it with 310 kW. Unladen weight within it ranges from 6,140 to 41,750 kg; here the ACTROS 2642 sits in the middle of that range with 25,700 kg. 8330 Mercedes Benz models across 126 series are on record.

Mercedes Actros — 1845 means 18 tonnes and 450 hp

The four-digit number on an Actros is not a serial number but two facts in one. The first two digits give gross vehicle weight in tonnes, the last two engine output in horsepower — divided by ten. An Actros 1845 is therefore rated at 18 tonnes and delivers 450 hp. A 2551 is a 25-tonner with 510 hp.

Read on 4 more paragraphs

The same system applies across the Mercedes range, from the light Atego to the heavy Arocs. Master it once and every Mercedes designation becomes readable. It also shows immediately why comparing with Scania or Volvo can go wrong: there the same position carries power alone, with no weight figure.

Letters follow the number, and for the purchase they matter almost more. LS is the tractor unit, L the long-haul chassis, K the tipper. An Actros 1845 LS is therefore the tractor, an 1845 L the chassis for a body. Searching by the number alone returns both types mixed together.

Two siblings stand beside the Actros and are often confused: the Arocs is the construction and heavy-haulage version with a reinforced frame, the Antos was the distribution version for heavy local work. All three share large parts of their engineering and the numbering system. Anyone looking for a tipper or mixer should include the Arocs in the search.

The Actros has been built since 1996 and renewed in several stages, known in the market as MP1 to MP5. These codes rarely appear in listings, yet they shape parts availability and equipment more than the type number does. With two vehicles carrying identical designations, first registration decides which stage you are looking at.

Sources: Wikipedia: Mercedes-Benz Actros (Wikipedia), Mercedes-Benz: Actros L 1845 LS, truck1.eu

Technical data

Engine

Power300 kWcorrect
Cylinders6correct
Displacement11,946 cm³correct

Dimensions and weights

Length11,420 mmcorrect
Width2,500 mmcorrect
Unladen weight25,700 kgcorrect
Gross vehicle weight27,500 kgcorrect

Drivetrain and chassis

Gears8correct

Where this model stands

Power-to-weight ratio: 11.7 kW/t (300 kW / 25.7 t)

Stronger than 54% of the trucks in the register — out of 25,242 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Mercedes Benz ACTROS 2642 have?

The Mercedes Benz ACTROS 2642 delivers 300 kW.

How much does the Mercedes Benz ACTROS 2642 weigh?

The unladen weight is 25,700 kg.

What is the gross vehicle weight of the Mercedes Benz ACTROS 2642?

27,500 kg.

What engine does the Mercedes Benz ACTROS 2642 have?

6 cylinders, 11,946 cm³ displacement.

What are the dimensions of the Mercedes Benz ACTROS 2642?

11,420 mm × 2,500 mm.

When was the Mercedes Benz ACTROS 2642 built?

Production years: 2014.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 9 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: Traficom — Finnish vehicle register (retrieved August 2026) · How we check the data

Truck in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare