Technical register for agricultural, construction and commercial machinery · sourced data
StartCar trailers up to 3.5 tKRÖGER › 27TTF50.20/367+70

KRÖGER 27TTF50.20/367+70

Built: 2007 · Series: Other models

More machines from model year 2007

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

27TTF50.20/367+70 comes from the manufacturer KRÖGER. According to the available register data, the vehicle dates from 2007. The car trailer is 6,490 mm long and 2,530 mm wide. Its kerb weight comes to 700 kg. The permitted gross weight is 2,700 kg. The Finnish vehicle register lists one example of this model.

Kröger – other car trailers: the collective page of models outside the named ranges between TTF, TTB and THS, 270 to 1,400 kg unladen weight, up to 3.5 t gross weight

This page gathers the Kröger car trailers the register could not assign to a named range – tandem and low-bed trailers up to 3.5 t gross weight for carrying vehicles, boats and construction machinery for both private and business users alike. The type codes TTF, TTB, BTF, THS and ZHP order the individual ranges, with the following number pairs such as 40.20 or 30.15 marking the respective version within the range.

Read on 3 more paragraphs

The register lists here 35 versions with unladen weights from 270 to 1,400 kg, gross weights from 1,000 to 3,500 kg, lengths from 3,600 to 11,230 mm and widths from 1,750 to 2,560 mm.

The wide span of lengths, from compact trailers to versions over eleven metres, shows the focus on low-bed and transport trailers for long or bulky loads such as boats, construction machinery or vehicles that need a long platform despite a low kerb weight; many versions can be lowered to give a shallow loading angle.

On used units, the condition of the frame and chassis rails against sagging counts, corrosion on axles and the overrun brake, tyres and rims, the function of ramps and lashing points, and lighting and the electrical connector; on the long low-bed versions also the load capacity of the platform over its full length and the condition of the wheel arches on lowered loading floors.

Sources: Kennwerte der Modelle Kröger (weitere Modelle)

Technical data

Dimensions and weights

Length6,490 mmcorrect
Width2,530 mmcorrect
Unladen weight700 kgcorrect
Gross vehicle weight2,700 kgcorrect

Frequently asked questions

How much does the KRÖGER 27TTF50.20/367+70 weigh?

The unladen weight is 700 kg.

What is the gross vehicle weight of the KRÖGER 27TTF50.20/367+70?

2,700 kg.

What are the dimensions of the KRÖGER 27TTF50.20/367+70?

6,490 mm × 2,530 mm.

When was the KRÖGER 27TTF50.20/367+70 built?

Production years: 2007.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare