Kontti 30/KT
Built: 2006 · Series: Other models
More machines from model year 2006
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Kontti – other models: the collective page of small trailers outside the named ranges, from K 28 to K 50 and EVT/EVP versions, 130 to 600 kg kerb weight, 750 kg gross weight, up to 7.12 m length
This page gathers the small Kontti trailers the register could not assign to a named range. The K type designation combines the range with a two-digit number from K 28 to K 50, supplemented by the suffixes V, L, KT or U for the version; alongside these sit the EVT and EVP ranges of similar build, plus individual types such as REINDEER 33/290/U and KONTTI 30.
Read on 3 more paragraphs
The register lists 54 versions here with a kerb weight of 130 to 600 kg; the gross weight is uniformly 750 kg, while length ranges from 3,130 to 7,120 mm at widths of 1,510 to 2,220 mm.
With a gross weight of 750 kg throughout, all the Kontti models on this page stay within the class that can be towed on a standard car licence without a further test. The wide spread of length, from just over 3 m to more than 7 m at a constant gross weight, is typical of boat and multi-purpose trailers, where a light, long frame gives more load area at low kerb weight.
Buying a used Kontti trailer means checking the frame and skids for corrosion above all, especially on the long boat-trailer versions that regularly stand in water. Add to that the condition of the rollers or sliding skids, the winch, wheel bearings and tyres, and the coupling. Parts for axles, couplings and lighting are available through the general trailer accessory trade; frame and skid parts specific to the brand usually only through the manufacturer.
Technical data
Dimensions and weights
| Length | 4,300 mmcorrect |
|---|---|
| Width | 1,900 mmcorrect |
| Unladen weight | 350 kgcorrect |
| Gross vehicle weight | 750 kgcorrect |
Frequently asked questions
How much does the Kontti 30/KT weigh?
The unladen weight is 350 kg.
What is the gross vehicle weight of the Kontti 30/KT?
750 kg.
What are the dimensions of the Kontti 30/KT?
4,300 mm × 1,900 mm.
When was the Kontti 30/KT built?
Production years: 2006.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
28/270
30/KT/266+63
30/KT/270+63
30/KT/288
33 KT/246+64
33/290
33/KT/260+64
35/300
3600X1570
EVP 75
EVP 75/260+64
EVT 33
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.