Technical register for agricultural, construction and commercial machinery · sourced data
StartCar trailers up to 3.5 tJuhta › AUTO-JUHTA 1300/315

Juhta AUTO-JUHTA 1300/315

Built: 1993 · Series: Other models

More machines from model year 1993

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

AUTO-JUHTA 1300/315 comes from the manufacturer Juhta. According to the available register data, the vehicle dates from 1993. The car trailer is 4,900 mm long and 2,330 mm wide. Its kerb weight comes to 290 kg. The permitted gross weight is 1,300 kg. The Finnish vehicle register lists one example of this model.

Juhta – other models: Finnish car trailers with payload codes from 1000 to 1500, boat trailers (VENE) up to 12.45 m, 170 to 1,300 kg kerb weight

Juhta is a Finnish maker of car trailers; this collective page gathers models outside the named series. The four-digit base numbers such as 1000, 1300 or 1500 give the payload in kilograms, while letter suffixes describe the equipment: JR and JRK mark versions with side panels, KL and KLR closed box bodies, VJ and VENE boat trailers, and KTK combined tipper-transport versions.

Read on 3 more paragraphs

The register lists 189 versions with kerb weights from 170 to 1,300 kg; gross weights for 183 models range from 750 to 3,500 kg. Lengths for 162 models run from 3,150 to 12,450 mm and widths from 1,740 to 2,600 mm — as with other Finnish makers, the long versions are mostly boat trailers.

In Finland, trailers of this class are widespread, since boat and material transport is part of daily life for many households and businesses. The fine gradation of payload classes from 1,000 to over 3,000 kg allows a suitable trailer to be matched to almost any towing vehicle.

When buying used, the frame and axle mounts deserve close attention because of road salt and damp, as do the overrun coupling and brake cables. On boat trailers, check the keel rollers, support rollers and the condition of the frame section that stands in water. Lights and tyres should be tested before handover; spare parts are stocked by Finnish trailer specialists.

Sources: Kennwerte der Modelle Juhta (weitere Modelle), Traficom (Finnland)

Technical data

Dimensions and weights

Length4,900 mmcorrect
Width2,330 mmcorrect
Unladen weight290 kgcorrect
Gross vehicle weight1,300 kgcorrect

Frequently asked questions

How much does the Juhta AUTO-JUHTA 1300/315 weigh?

The unladen weight is 290 kg.

What is the gross vehicle weight of the Juhta AUTO-JUHTA 1300/315?

1,300 kg.

What are the dimensions of the Juhta AUTO-JUHTA 1300/315?

4,900 mm × 2,330 mm.

When was the Juhta AUTO-JUHTA 1300/315 built?

Production years: 1993.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare