Technical register for agricultural, construction and commercial machinery · sourced data
Start › Trailers › Jehu › JEHU 32-15

Jehu 32-15

Built: 1975 · Series: Other models

More machines from model year 1975

The photo shows the VPV26000 from the same series. Source: https://www.kleinanzeigen.de/s-anzeige/anhaenger-heckkipper-

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

JEHU 32-15 comes from the manufacturer Jehu. According to the available register data, the vehicle dates from 1975. The trailer is 12,750 mm long and 3,000 mm wide. The unladen weight is 6,000 kg. The Finnish vehicle register lists one example of this model.

Jehu VPV26000 – EU category O4 trailer, built 1974: 28,000 kg gross weight, 20,550 kg payload, 8.60 m length, 2.45 m width.

With a gross weight of 28,000 kg, the Jehu VPV26000 belongs to the EU trailer category O4, the heavy trailers above 10 tonnes. Built in 1974, it is one of the older vehicles of this class recorded in the register.

Read on 3 more paragraphs

With an unladen weight of 7,450 kg, the payload comes to 20,550 kg. At 8.60 m long and 2.45 m wide, this load is concentrated on a comparatively short chassis, a design typical of heavy, compact goods whose weight reaches the limit faster than load volume.

Category O4 trailers are generally fitted with an air brake system across several axles. Towing in a combination requires licence category C1E or CE in the EU, depending on the combination's gross weight. The short, compact build combined with high payload calls for a correspondingly strong frame and axle construction, since the load sits close together rather than spread along a long deck, and the frame has to absorb correspondingly high local stresses.

When buying a used trailer from the 1974 build year, given its age, the frame around the axle mounts deserves particular attention for cracking and rust, especially thoroughly on such an old vehicle. The checklist should also cover the axle bearings and their suspension given the high payload, the air lines and couplings for leaks, and the availability of spare parts for the brakes and axle on a vehicle this age. The drawbar and its mounting point deserve the same close attention, since they carry the full pulling force of a short, heavy trailer.

Sources: SpecCodex-Register: Kennwerte des Modells Jehu VPV26000, Zulassungsdaten Traficom (Finnland)

Technical data

Dimensions and weights

Length12,750 mmcorrect
Width3,000 mmcorrect
Unladen weight6,000 kgcorrect

Frequently asked questions

How much does the Jehu JEHU 32-15 weigh?

The unladen weight is 6,000 kg.

What are the dimensions of the Jehu JEHU 32-15?

12,750 mm × 3,000 mm.

When was the Jehu JEHU 32-15 built?

Production years: 1975.

What to check before buying

  • Search the frame and welds at the axle mounts — that is where cracks start.
  • Check the brakes and the last inspection in the papers.
  • Compare the chassis number with the papers.
  • Look at the floor, cover or body from the inside — rust does not show from outside.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 4 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare