Irmer & Elze CPS 4.0 G
Built: 2016 · Series: Other models
More machines from model year 2016
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Irmer & Elze – other models: the collective page of compressor trailers from Bad Oeynhausen outside the named ranges, CPG and CPS series, unladen weight 910 to 1,035 kg, gross weight up to 1,060 kg
Irmer & Elze builds mobile compressors in Bad Oeynhausen, and this collective page gathers the trailer versions of the brand that the register could not assign to a separate range. The model names CPG 30 and CPS 185, CPS 4.0, CPS 4.0 G and CPS 5.5 each state the series of the mounted compressor, with the number in the CPS types giving the delivery rate in cubic metres per minute.
Read on 3 more paragraphs
The register lists 5 versions with unladen weights from 910 to 1,035 kg, gross weights from 1,045 to 1,060 kg, lengths from 3,531 to 3,660 mm and widths from 1,400 to 1,500 mm.
The small gap between unladen weight and gross weight comes from the design: the compressor is permanently mounted on the chassis and accounts for most of the total mass, leaving little room for additional payload. Such trailer-mounted compressors supply compressed air to building sites and civil-engineering and pipeline work without needing a separate compressor vehicle.
When buying used, the operating hours and service history of the compressor unit matter, along with the condition of the oil cooler and intake filter and the tightness of the compressed-air connections. The chassis, axle and brake system follow the usual trailer checkpoints, and the drawbar and overrun coupling should move smoothly. Spare parts and service for the compressor unit run through the manufacturer in Bad Oeynhausen.
Sources: Kennwerte der Modelle Irmer & Elze (weitere Modelle), Irmer & Elze (Hersteller)
Technical data
Dimensions and weights
| Length | 3,546 mmcorrect |
|---|---|
| Width | 1,450 mmcorrect |
| Unladen weight | 1,035 kgcorrect |
| Gross vehicle weight | 1,060 kgcorrect |
Frequently asked questions
How much does the Irmer & Elze CPS 4.0 G weigh?
The unladen weight is 1,035 kg.
What is the gross vehicle weight of the Irmer & Elze CPS 4.0 G?
1,060 kg.
What are the dimensions of the Irmer & Elze CPS 4.0 G?
3,546 mm × 1,450 mm.
When was the Irmer & Elze CPS 4.0 G built?
Production years: 2016.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 6 individual figures for this model. They come from 2 recorded sources; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.