Fiska KPV 1000
Built: 2000 · Series: Other models
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Technical data
Dimensions and weights
| Length | 5,950 mmcorrect |
|---|---|
| Width | 2,200 mmcorrect |
| Unladen weight | 210 kgcorrect |
| Gross vehicle weight | 1,000 kgcorrect |
Frequently asked questions
How much does the Fiska KPV 1000 weigh?
The unladen weight is 210 kg.
What is the gross vehicle weight of the Fiska KPV 1000?
1,000 kg.
What are the dimensions of the Fiska KPV 1000?
5,950 mm × 2,200 mm.
When was the Fiska KPV 1000 built?
Production years: 2000.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
1300
1500
1800
FISKA 1700
FISKA KPV 1000
FISKA KPV 1700
KPV 750
KPV-2700
KPV1500/275
KPV2100/150X300
PV 285/1700
PV1000/355
Sources: [1]
Trailer in 3D section
Turn the model, look inside and click an assembly — each one is explained.