Technical register for agricultural, construction and commercial machinery · sourced data
Start › Vans › Citroën › JUMPER 2.5D-232A52-FOURGON/320

Citroën JUMPER 2.5D-232A52-FOURGON/320

Built: 2000 · Series: Vans up to 3.5 t (Class N1)

More machines from model year 2000

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

The JUMPER 2.5D-232A52-FOURGON/320 from Citroën is part of the Vans up to 3.5 t (Class N1) series. Production: 2000. The engine delivers 63 kW, with a displacement of 2,440 cm³. The machine is 5,050 mm long and 2,000 mm wide. The unladen weight is 1,820 kg. The gross vehicle weight is 3,250 kg. The Vans up to 3.5 t (Class N1) series covers 1567 models. Rated output within it ranges from 19 to 120 kW; the JUMPER 2.5D-232A52-FOURGON/320 sits in the middle of that range with 63 kW. Its immediate neighbours are the JUMPER FOURGON 2.0HDI-ZAAMFB/320 below it with 62 kW and the 5D BREAK ZX TURBO D-N2D9/254 above it with 66 kW. Unladen weight within it ranges from 640 to 3,130 kg; here the JUMPER 2.5D-232A52-FOURGON/320 sits in the middle of that range with 1,820 kg. 2388 Citroën models across 34 series are on record.

Citroën vans up to 3.5 t (class N1) – collective page focused on body style and payload logic: from the Type H through the 2 CV AU/AZU and Type 23 to Berlingo/Jumpy/Jumper, engines from 19 to 120 kW

The EU vehicle class N1 covers light commercial vehicles up to 3.5 t gross vehicle weight; this page is a collective page built from registration data (Netherlands, Finland) bundling every Citroën range recorded in that class. Citroën was founded in 1919 by André Citroën in Paris, part of the PSA group since the merger with Peugeot (1976), today Stellantis. The focus here is on the body style and payload logic of the ranges: the Type H (HY, 1947–1981) shaped the panel-van form with its corrugated bodywork; the 2 CV derivatives AU and AZU offered the same payload class in passenger-car format as a van or pick-up; the Type 23 range (23 R, 23 RU) was Citroën's own light truck with flatbed and box bodies. Following the same modular principle came later the C15 and C25 (both with Fiat and Peugeot sister models) and the Berlingo, Jumpy and Jumper, each offered with panel-van, high-roof and pick-up variants for different payload classes.

Read on 3 more paragraphs

The register lists 416 versions, with recorded outputs of 19 to 120 kW, displacements of 375 to 3,798 cm³ across 2 to 4 cylinders, kerb weights of 395 to 3,265 kg and gross vehicle weights of 540 to 3,500 kg; width ranges from 1,380 to 2,520 mm, length from 3,435 to 6,730 mm.

Payload grows with the range: on the 2 CV derivative it barely exceeds 500 kg, on the Type 23 and Jumper chassis considerably more – Citroën thus covers practically the whole payload spectrum of this class, in direct competition with the technically related Fiat and Peugeot ranges.

On a used example, the body style decides the checkpoints: on the panel van the bulkhead and load-floor corrosion, on the pick-up the load bed and tow hitch, on the high-roof model the weatherproofing of the roof load and headliner – and it is generally worth checking the actually registered payload against the chassis number, since conversions are common on these ranges.

Sources: SpecCodex register, model data: Citroën Transporter bis 3,5 t (Klasse N1), Citroën (Stellantis, Hersteller)

Technical data

Engine

Power63 kWcorrect
Displacement2,440 cm³correct

Dimensions and weights

Length5,050 mmcorrect
Width2,000 mmcorrect
Unladen weight1,820 kgcorrect
Gross vehicle weight3,250 kgcorrect

Where this model stands

Power-to-weight ratio: 34.6 kW/t (63 kW / 1.8 t)

Stronger than 18% of the vans in the register — out of 7,144 models with a stated power figure.

Calculated from the documented figures above — not a rating.

Frequently asked questions

How much power does the Citroën JUMPER 2.5D-232A52-FOURGON/320 have?

The Citroën JUMPER 2.5D-232A52-FOURGON/320 delivers 63 kW.

How much does the Citroën JUMPER 2.5D-232A52-FOURGON/320 weigh?

The unladen weight is 1,820 kg.

What is the gross vehicle weight of the Citroën JUMPER 2.5D-232A52-FOURGON/320?

3,250 kg.

What engine does the Citroën JUMPER 2.5D-232A52-FOURGON/320 have?

2,440 cm³ displacement.

What are the dimensions of the Citroën JUMPER 2.5D-232A52-FOURGON/320?

5,050 mm × 2,000 mm.

When was the Citroën JUMPER 2.5D-232A52-FOURGON/320 built?

Production years: 2000.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 7 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Van in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare