Technical register for agricultural, construction and commercial machinery · sourced data
StartCar trailers up to 3.5 tCHRIST › CONCORDE/268+72

CHRIST CONCORDE/268+72

Built: 2004 · Series: Other models

More machines from model year 2004

Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required

CHRIST builds the CONCORDE/268+72. According to the available register data, the vehicle dates from 2004. Dimensions: 4,330 mm long and 2,220 mm wide. The unladen weight is 800 kg. The permitted gross weight is 1,800 kg. According to the Finnish vehicle register, 2 examples of this model are on record.

Christ – other models: the collective page of trailers up to 3.5 t outside the named ranges, from COMET through CONCORDE to CORONA, unladen weight 690 to 970 kg, gross weight up to 2,700 kg

Christ is a collective trailer page for versions up to 3.5 tonnes gross weight, gathering the models of the brand that the register could not assign to a separate range. The model names form several recognisable lines: COMET and CONCORDE each with attached dimension figures such as /268+72 or /285+72, CORONA and CARAT as standalone names, and the double name Tandem Trailer for two-axle versions.

Read on 3 more paragraphs

The register lists 16 versions with unladen weights from 690 to 970 kg, gross weights from 1,600 to 2,700 kg, lengths from 4,150 to 4,670 mm and widths from 2,170 to 2,327.5 mm.

With gross weights up to 2,700 kg and widths over 2 metres, these Christ versions are among the more spacious car trailers, of the kind used for boats, vehicles or bulky loads. The range from lighter single-axle units to tandem versions covers both occasional transport trips and regular commercial use.

When buying used, check the axles and wheel bearings for play and running noise, and on braked tandem versions the brake system for even action on both axles. The frame and load floor deserve a look for rust and deformation, especially at the load-bearing points. The drawbar, overrun coupling and jockey wheel should move smoothly, lights and the plug socket should work; a current inspection certificate gives information on roadworthy condition.

Sources: Kennwerte der Modelle Christ (weitere Modelle)

Technical data

Dimensions and weights

Length4,330 mmcorrect
Width2,220 mmcorrect
Unladen weight800 kgcorrect
Gross vehicle weight1,800 kgcorrect

Frequently asked questions

How much does the CHRIST CONCORDE/268+72 weigh?

The unladen weight is 800 kg.

What is the gross vehicle weight of the CHRIST CONCORDE/268+72?

1,800 kg.

What are the dimensions of the CHRIST CONCORDE/268+72?

4,330 mm × 2,220 mm.

When was the CHRIST CONCORDE/268+72 built?

Production years: 2004.

What to check before buying

  • Check the hour meter against the service records — a replaced instrument is the most common gap.
  • Compare the data plate and chassis number with the papers.
  • Check the weights in the papers against the figures here — attachments change them.
  • Ask about parts availability for this build year — the running costs hang on it.

A general list for this type of machine — no substitute for an inspection or an appraiser.

Looking for this machine?
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
Need parts for this model?
We ask the suppliers and come back with price and lead time.
Request spare parts →

This page carries 5 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.

The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.

Missing a figure you were looking for? Report it →

Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →

Other models in this series

Sources: [1]

Trailer in 3D section

Turn the model, look inside and click an assembly — each one is explained.

Compare