Carpimotor 600 4x4 EFI
Built: 2011 · Series: Other models
More machines from model year 2011
Not the right version? The data comes from vehicle registers holding many near-identical versions side by side. Photograph the data plate — we read make and type from it. Open the scanner e-mail address required
Carpimotor – other models: the collective page of compact four-wheel-drive utility tractors outside the named ranges, types 400 and 600 4x4 with EFI and V-twin engine, 9.8 to 14.5 kW, 420 to 460 kg unladen weight
This page gathers the Carpimotor models the register could not assign to a named range – small four-wheel-drive vehicles of the 400 and 600 size, whose type designation reflects the displacement class in cubic centimetres. The suffixes EFI and V-Twin denote electronic fuel injection and the V-twin two-cylinder engine; all models carry four-wheel drive already in the name.
Read on 3 more paragraphs
The register lists here 8 versions with 9.8 to 14.5 kW from one- and two-cylinders of 352 to 552 cm³, unladen weights from 420 to 460 kg, gross weights from 542 to 545 kg, lengths from 2,150 to 2,173 mm and widths from 1,140 to 1,189 mm.
At these dimensions and weights, the Carpimotor models sit in the class of small 4x4 utility vehicles for smallholding and grounds work, well below the lightest classic farm tractors. Drive to all four wheels and the low weight allow use on soft and uneven ground, for example on slopes, in orchards or on unpaved tracks, where larger and heavier tractors reach their limits.
On used examples, cooling and the injection system count on these small engines, along with the condition of drive shafts and the four-wheel-drive clutch, plus frame and tyres; on the V-twin versions valve clearance and the ignition system also matter.
Sources: SpecCodex register, model data: Carpimotor (weitere Modelle)
Technical data
Engine
| Power | 14.5 kWcorrect |
|---|---|
| Cylinders | 2correct |
| Displacement | 552 cm³correct |
Dimensions and weights
| Length | 2,150 mmcorrect |
|---|---|
| Width | 1,189 mmcorrect |
| Unladen weight | 460 kgcorrect |
| Gross vehicle weight | 542 kgcorrect |
Where this model stands
Power-to-weight ratio: 31.5 kW/t (14 kW / 0.5 t)
Power class: Compact (< 40 hp)
Stronger than 7% of the tractors in the register — out of 15,663 models with a stated power figure.
Calculated from the documented figures above — not a rating.
Frequently asked questions
How much power does the Carpimotor CARPIMOTOR 600 4x4 EFI have?
The Carpimotor CARPIMOTOR 600 4x4 EFI delivers 14.5 kW.
How much does the Carpimotor CARPIMOTOR 600 4x4 EFI weigh?
The unladen weight is 460 kg.
What is the gross vehicle weight of the Carpimotor CARPIMOTOR 600 4x4 EFI?
542 kg.
What engine does the Carpimotor CARPIMOTOR 600 4x4 EFI have?
2 cylinders, 552 cm³ displacement.
What are the dimensions of the Carpimotor CARPIMOTOR 600 4x4 EFI?
2,150 mm × 1,189 mm.
When was the Carpimotor CARPIMOTOR 600 4x4 EFI built?
Production years: 2011.
What to check before buying
- Check the hour meter against the service records — a replaced instrument is the most common gap.
- Compare the data plate and chassis number with the papers.
- Check the weights in the papers against the figures here — attachments change them.
- Load the hydraulics and watch for sag.
- Ask about parts availability for this build year — the running costs hang on it.
A general list for this type of machine — no substitute for an inspection or an appraiser.
We do not sell machines. We ask the dealers who carry this model and come back with price and lead time.
Request a quote →
We ask the suppliers and come back with price and lead time.
Request spare parts →
This page carries 9 individual figures for this model. They come from 1 recorded source; every figure can be traced there. What we cannot document is not here — we leave gaps open rather than estimate them.
The technical data on this page comes from official vehicle registration records (RDW/Traficom), not from the manufacturer.
Missing a figure you were looking for? Report it →
Know this machine better? Have a photo, a manual, or know that a figure is wrong? Add it to the register →
Other models in this series
Sources: [1]
Tractor in 3D section
Turn the model, look inside and click an assembly — each one is explained.